Location And Function Of Parts; Front Panel - Sony BVM-14F5U Operation Manual

Location and Function of Parts

Front Panel

!º SHIFT button
!¡ Function buttons
!™ Monitor memory
card insertion slot
!£ OPTION connector
1 Tally lamp
With factory settings, the Tally lamp lights when pins
No. 3 and No. 8 of the REMOTE 2 connector on the
rear panel are connected. By changing the setting in
the REMOTE menu, different pins on the remote
connector can be used to control the tally lamp.
For information about the REMOTE menu, see "Assigning
the Remote Control Functions —REMOTE Menu" on page
38.
2 POWER switch
Press to power the BVM-14F5U/14F5E/14E5U/14E5E
on or off. If your system includes more than one
monitor, you can use the ADDRESS menu to power a
selected monitor on or off, or to power all monitors on
or off at once.
For more information about the ADDRESS menu, see
"Selecting the Monitor to Control —ADDRESS Menu" on
page 59.
3 DEGAUSS button
Press to manually degauss the monitor CRT. When
degaussing repeatedly, wait for 5 minutes before
pressing the button again. (The monitor CRT is
degaussed automatically each time the power is turned
on.)
4 Numeric keypad
Use the numeric keypad to enter menu settings and
channel numbers for signals that you want to input to
the monitor.
INPUT
1 2 3
4 6
5 0 to 9 buttons
7 8 9
Ent (enter) button: Confirms a
0 Ent
Del
number or character (the same
function with the ENTER button of the
Menu operation buttons 6).
Del (delete) button: Deletes a
number or character entered .
1 Tally lamp
2 POWER switch
3 DEGAUSS button
4 Numeric keypad
5 MANUAL adjustment
buttons and knobs
6 Menu operation buttons
7 POWER lamp
8 STANDBY lamp
9 OVER LOAD lamp
7