Options - Sony BVM-14F5U Operation Manual

Options

For External Control
BKM-11R Monitor Control Unit
A controller for this monitor and other BVM-series
video monitors, allowing you to control multiple
monitors from one control unit.
BKM-12Y Monitor Memory Card
Memory cards which can be read and written by the
BVM-14F5U/14F5E/14E5U/14E5E.
BKM-14L Auto Setup Probe
This probe allows automatic adjustment of this
monitor's color temperature.
For Screen
BKM-33H14 Monitor 16:9 Mask
Adapts the BVM-14F5U/14F5E/14E5U/14E5E screen
for 16:9 aspect ratio display.
For Installation
BKM-30E14 Rack Mount Kit
Rack mount kit for mounting the BVM-14F5U/14F5E/
14E5U/14E5E in an EIA standard 19-inch rack.
Decoder and Input Expansion Adaptors
The input connector panel is configured by sliding
optional decoder adaptors and/or input expansion
adaptors into input option slots at the rear of the
monitor. The BVM-14F5U/14F5E/14E5U/14E5E may
be fitted with up to four adaptors.
Note
When installing the adaptors, be sure to perform the
necessary input signal setup with the INPUT
CONFIGURATION menu. If the setup is not
performed, the adaptors may not function correctly.
For information about the INPUT CONFIGURATION
menu, see "Setting the Input Configuration —INPUT
CONFIGURATION Menu" on page 32.
BKM-20D SDI 4:2:2 Decoder Adaptor
Includes decoders for serial digital component signals
(525/625). Input/output connectors for three serial
digital channels (component inputs only) and three
analog channels. The input signal type for each
connector is set with the INPUT CONFIGURATION
menu, in accordance with the configuration of the
connector panel.
BKM-21D SDI Multi Decoder Adaptor
Includes decoders for serial digital signals (525/625
component and NTSC/PAL composite) and analog
composite signals (NTSC and PAL). Input/output
connectors for three serial digital channels and three
analog channels are equipped. The input signal type
for each connector is set with the INPUT
CONFIGURATION menu, in accordance with the
configuration of the connector panel.
BKM-24N NTSC Decoder Adaptor
Includes a decoder for analog composite NTSC signals
and input/output connectors for six analog channels.
The input signal type for each connector is set with the
INPUT CONFIGURATION menu, in accordance with
the configuration of the connector panel.
BKM-25P PAL Decoder Adaptor
Includes a decoder for analog composite PAL signals
and input/output connectors for six analog channels.
The input signal type for each connector is set with the
INPUT CONFIGURATION menu, in accordance with
the configuration of the connector panel.
BKM-26M PAL-M Decoder Adaptor
Includes a decoder for analog composite PAL-M
signals and input/output connectors for six analog
channels. The input signal type for each connector is
set with the INPUT CONFIGURATION menu, in
accordance with the configuration of the connector
panel.
BKM-27T Tri-Standard Decoder Adaptor
Includes decoders for analog composite NTSC, PAL,
and SECAM signals and input/output connectors for
six analog channels. The input signal type for each
connector is set with the INPUT CONFIGURATION
menu, in accordance with the configuration of the
connector panel.
3