Sony BVM-14F5U Operation Manual page 40

Setting the Input Configuration — INPUT CONFIGURATION Menu
322
SAFE AREA (xxCH): Select the type of screen. ÷ 323
4:3 OR 16:9: Display the screen and safe area in 4:3 or 16:9 aspect ratio.
16:9 IN 4:3: Display a 16:9 aspect ratio safe area in a 4:3 aspect ratio screen.
4:3 IN 16:9: Display a 4:3 aspect ratio safe area in a 16:9 aspect ratio screen.
323
80%
90%
100%
326
CHANNEL NAME (xxCH): Give the channel a name. Select a preset name, or enter a
new one.
PROG: Program signal.
EDIT: Signal from an editor.
CAM: Camera signal.
VTR: Signal from a VTR.
NEW NAME: Enter a new name. (Up to 20 characters can be entered and up to six characters
from the head of the name are displayed in the INPUT CONFIGURATION menu (301, 2/2).)
328
COLOR TEMP (xxCH): Select STD, COL1, COL2, or CH SET.
STD: Use common data (factory setting: D65).
COL1: Use common data (factory setting: D65).
COL2: Use common data (factory setting: D93).
CH SET: Use data for the current channel (factory setting: D65).
330
COPY (xxCH): Select the source to be copied from.
OTHER CH: Copy data from another channel. Enter the channel number.
When the input channel number is deleted with the Del button. the number "1" appears
instead. Restore the previous setting by pressing the MENU button, then re-enter the channel
number. (Setting with the UP/DOWN buttons or PHASE knob is possible without pressing the
MENU button.)
OTHER MONITOR...: Copy data from another monitor. ÷ 332
MEMORY CARD...: Copy data from a memory card. ÷ 334
332
data.
MONITOR ADDRESS: Enter the address of the monitor from which to copy data. ÷ 333
36
4:3 OR 16:9 (xxCH): Select the size of the safe area.
OTHER MONITOR (xxCH): Enter the address of the monitor from which to copy
333
OTHER MONITOR (xxCH): Select which channel of the chosen monitor from
which to copy data. ÷ Copy is carried out.
CH NO: Enter the channel number.
When the input channel number is deleted with the Del button. the number "1"
appears instead. Restore the previous setting by pressing the MENU button, then re-
enter the channel number. (Setting with the UP/DOWN buttons or PHASE knob is
possible without pressing the MENU button.)