Sony BVM-14F5U Operation Manual page 10

Overview
Decoder Adaptor Priority
The table on the right shows which decoder adaptor
will be selected preferentially when more than one
decoder adaptor which can accept the NTSC or PAL
signal format have been installed in the monitor.
For example, when a BKM-24N and a BKM-27T are
installed and an NTSC signal is selected, the NTSC
signal connected to the BKM-24N's input connectors
and the NTSC signal connected to the BKM-27T's
input connectors are both processed by the decoder on
the BKM-24N.
Note on using the BKM-20D/21D
When one of the input option slots on the rear of the
monitor has a BKM-20D/21D SDI Decoder Adaptor
(option) installed, if the slot to the right has another
adaptor or the analog input connectors board installed,
Fig.1
Input option slots
When installing adaptors, moving the analog input
connectors board, or fitting a cover plate over an
unused slot, always fit the BKM-20D/21D as the last
step of the operation. If a BKM-20D/21D is already
installed, remove it temporarily while carrying out the
other operations, then reinstall it last.
6
Input adaptor
Cover plate
Analog input connectors board
Input signal type
and format
BKM-
24N
Composite NTSC 1
signal
PAL
Y/C
NTSC 1
signal
PAL
Numbers in the table show priority.
or a cover plate fitted (see Fig. 1), the radiation shield
(see Fig. 2) of the BKM-20D/21D may be damaged or
detached.
Fig. 2
Radiation shield
BKM-20D/21D
Input adaptor, etc
Decoder adaptor
BKM- BKM- BKM-
25P 27T 21D
3 2
1 3 2
2
1 2