Table of Contents
Advertisement
Submenu
Setting
Auto Input Select
Select the auto detection setting of the
input signal from "Mode1," "Mode2,"
"Off."
Mode1:
Inputting signals to the input
connector automatically changes
connectors.
Notes
Mode2:
Gives priority to PORT A and
switches the PORT automatically.
Notes
When "Auto Input Select" is set
to "Mode1" and there is no
input signal to any connector,
inputting a signal to one of the
connectors detects the signal
and displays it on the screen.
When a signal is input to one of
the connectors, the "Auto Input
Select" function does not
operate even if a signal is input
to another connector.
When "Skip" is set for the signal
input connector, the signal is
displayed on the screen.
When using a multi-image
display, the detected signal is
displayed on the main display.
If a signal is detected while
displaying the menu, the menu
will be hidden.
When "Auto Input Select" is set
to "Mode2" and a signal is input
to the connector assigned to
PORT A, or PORT A and PORT B,
the PORT A signal is displayed
on the screen. When a signal is
not input to the connector
assigned to PORT A or the
signal disappears in the middle
of input, and a signal is input to
the connector assigned to only
PORT B, the PORT B signal is
displayed on the screen.
When a signal is input to the
connector assigned to PORT A
while displaying the PORT B
signal on the screen, the PORT
A signal is displayed on the
screen.
If a signal is input to the
connector not assigned to PORT
A/B, the signal is not displayed
on the screen.
If a signal is detected while
displaying the menu, the menu
will be hidden.
Submenu
System Configuration menu
Submenu
Control Lock
Control Lock
Lock Mode
OSD Setting
Menu Position
Status Display
Select Port
Input Connector Name
Flip Pattern
PIP/POP Mode
27
Setting
Off:
The Auto Input Select function does
not operate.
Setting
Set when you want to limit the
operation of the control panel. Set to
"Off" for no limit, "On" to limit.
Sets the range to limit the operation of
the control panel. This setting is
available when "Control Lock" is set to
"On."
Menu:
Limits the menu operations other
than the control lock setting.
Menu&Button:
Limits all operations other than the
control lock setting.
Sets the screen position for the OSD
menu.
Select Port, Input Connector Name,
Control Lock, Signal Format, Scan Size,
Flip Pattern, PIP/POP Mode, and
Energy Saving Mode are displayed.
Control Lock
Signal Format
Scan Size
Energy Saving Mode
Advertisement
Table of Contents
