Sony BVM-14F5U Operation Manual page 57

Notes
• Before a monitor memory card can be used, it must be formatted it with the FORMAT menu
(805).
• System data and memory card data (800) cannot be stored on the same memory card. To store
memory card data, use another memory card.
• The BKM-12Y monitor memory card has a capacity of 256 Kbytes. It can store either system
data for up to 8 monitors or 38 files of memory card data.
771
BACK UP SYSTEM DATA: While the system is writing the data, a "–" mark blinks
at the top right of the menu. (It takes some time to save the data.)
BACK UP SYSTEM DATA
IN PROGRESS...SYSTEM
772
RE-STORE SYSTEM DATA: Confirm the data restore operation.
RE-STORE SYSTEM DATA
ALL DATA WILL BE
RESTORED
ARE YOU SURE?
OK: ENTER KEY
CANCEL: MENU KEY
To continue, press the ENTER button. ÷ Read the data from the monitor memory card. ÷
773
To cancel, press the MENU button. ÷ Return to the BACK UP SYSTEM DATA menu
(771).
773
RE-STORE SYSTEM DATA: While the system is reading the data, a "–" mark
blinks at the top right of the menu. (It takes some time to load the data.)
RE-STORE SYSTEM DATA
IN PROGRESS...SYSTEM
780
RE-START MONITOR: Turn the monitor off and on again automatically.
790
ADJ INT SIGNAL: Adjust the SETUP level and 100 IRE level of the internal white signal
which is used with the COLOR TEMP ADJ menu (200).
53