Vlan > Voice Vlan > Voice Vlan Port Settings - D-Link SmartPro DGS-1500-20 User Manual

5 Configuration
There are some pre-defined OUIs and when the user configures personal OUI, these pre-defined OUIs must
be avoided. Below are the pre-defined voice traffic's OUI:
Select the OUI and press Add to the lower table to complete the Auto Voice VLAN setting.
VLAN > Voice VLAN > Voice VLAN Port Settings
The Voice VLAN Port Settings page allows users to automatically place the voice traffic from IP phone to an
assigned VLAN to enhance the VoIP service. With a higher priority and individual VLAN, the quality and the
security of VoIP traffic are guaranteed.
From Port / To Port: A consecutive group of ports may be configured starting with the selected port.
Auto Detection: Switch will add ports to the voice VLAN automatically if it detects the device OUI matches
the Telephony OUI configured in Voice VLAN OUI Setting page. Use the drop-down menu to enable or
disable the OUI auto detection function. The default is Disabled
Tagged / Untagged: tagged or untagged the ports.
Click Apply to implement changes made and Refresh to refresh the voice vlan table.
OUI Vendor
00:E0:BB 3COM
00:03:6B Cisco
00:E0:75 Veritel
00:D0:1E Pingtel
00:01:E3 Siemens
00:60:B9 NEC/ Philips
00:0F:E2 Huawei-3COM
00:09:6E Avaya
Note: The default OUI for 3COM, Cisco, Veritel,
Pingtel, Siemens, NEC/Philips, Huawei3COM,
and Avaya is not common for all of their VoIP
devices.
Figure 5.33 – VLAN > Voice VLAN > Voice VLAN Port Settings
Note: Voice VLAN has higher priority than any
other features even QoS. Therefore the voice
traffic will be operated according to Voice VLAN
setting and not impacted by QoS feature.
D-Link Web Smart Switch User Manual
Mnemonic Name
3com
cisco
veritel
pingtel
siemens
nec&philips
huawei&3com
avaya
34