Time And Date - Dedicated Micros SD Advanced Installation And Operation Manual

Time and Date

This menu allows the time and date to be set on the unit. Required timezone information can also be
established and the unit time synchronised to that of the PC being used to view the webpages.
System Time
Current Time Zone
Time Format
Date Format
Set Time
Set Date
Set Time (Green)
Time Zone
SNTP Server
Dedicated Micros ©2009
The current system time and date is displayed.
Displays the currently selected time zone settings.
As default, the time displayed is in 12 hour format. This can be
changed to 24 hour if required.
As default, the date is entered dd/mm/yy. It can also be displayed
as mm/dd/yy or yy/mm/dd.
Enter a current time for the unit.
Enter a current date for the unit.
When current time/date as been entered, select this button to
implement changes.
Select the relevant timezone offset from the accompanying drop
down menu.
A Simple Network Time Protocol (SNTP) server allows external
devices to connect and set their current date and time settings to
that of the SNTP. If required, enter the SNTP server IP
address here.