Table of Contents
Advertisement
Video Output mode
Note: It will be necessary to reboot the unit to implement any change to the Video Output Mode.
Applet Location
Dedicated Micros ©2009
Select the display output that best suits the viewing monitor.
Select from:
PAL Default
PAL Reduced
VGA 800x600
VGA 1024x768
The location of the unit's Viewer menu applet is displayed. The
default location will always be the applet installed on the unit.
If accessing multiple units via a remote connection, all can be
assigned the same Viewer applet. This will lessen the load time
required when accessing different DVRs/Servers.
For example, if a local unit and a remote DVR are to be accessed, it
is possible to set the Applet location for both DVRs as the local unit.
If viewing the unit remotely, Dedicated Micros provide a remote applet
located on the Dedicated Micros website (www.dedicatedmicros.
com/software_release/index_firmware.php). Due to possible bandwith
restrictions on the network the DVR is located, using this remote
applet may improve data transfer speeds.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SD Advanced and is the answer not in the manual?
Questions and answers