Time, Date & Language - Dedicated Micros Digital Sprite Lite Setup Manual

Time, Date & Language
Date 30/10/2000
Time W 12:35 35
Date format Day, Month
Language English
4. Use the cursors to change the settings, in this case to 12:35.
Time, Date & Language
Date 30/10/2000
Time Time W 12:35
Date format Day, Month
Language English
5. Use the cursor to return to the options.
6. Press and hold the mode or menu key to exit the menus.
12
Time, Date & Language
Time, Date & Language Date
Time
Date Format
Language
Date
As default, the date is entered DD:MM:YYYY on PAL models and MM:DD:YYYY
on NTSC models, this can be changed using the Date format option below.
Time
The time should be entered in 24 hour format (HH:MM).
Note: Summer and Winter time is signalled by an 'S' or 'W' next to the time.
Date format
The date format can be changed from Day, Month to Month, Day depending on
regional preference.
Language
The menus can be displayed in a number of languages. Upon selection these are
presented as a dropdown list.
Note: When the time and date is displayed as 'External clock' the time and date
settings are being taken from unit 1 on the c-bus network.
WARNING: Images may be overwritten if the time or date is adjusted whilst
recording is in progress.
01/10/2000
S 12:00
Day, Month Month, Day
English Français, Deutsch, Espanól, Italiano