[Leading Edge Adjustment]; [Centering] - Konica Minolta Bizhub 652 User Manual

7.1 [System Settings]

[Leading Edge Adjustment]

Adjust the starting print position at the leading edge of each type of paper (with respect to the paper feed
direction).
1
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Printer Adjustment] ö [Leading Edge Adjustment].
% To adjust the starting print position at the leading edge of the second side for 2-sided printing (with
respect to the paper feed direction), press [Leading Edge Adjustment (Duplex Side 2)].
2
Select a paper type to be adjusted.
3
Load the paper into the Bypass Tray.
4
Press the Start key.
A test pattern is printed.
5
Check that the distance from the starting print position of the test
pattern to the edge of the paper (a) is 3/16 inches (4.2 mm).
% Press [+] or [-] to adjust the width.
Press the Start key to print a test pattern.
6
Press [OK].

[Centering]

Adjust the starting print position at the left edge of each paper tray (with respect to the paper feed direction).
0 Only 8-1/2 e 11 v (A4 v) plain paper can be used to adjust the Bypass Tray.
1
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Printer Adjustment] ö [Centering].
% To adjust the starting print position at the left edge of the second side for 2-sided printing (with re-
spect to the paper feed direction), press [Centering (Duplex 2nd Side)].
2
Select a paper tray to be adjusted.
3
Press the Start key.
A test pattern is printed.
4
Check that the distance from the starting print position of the test
pattern to the left edge of the paper (b) is 1/8±1/32 inches (3.0 ±
0.5 mm).
% Press [+] or [-] to adjust the width.
Press the Start key to print a test pattern.
5
Press [OK].
bizhub 652/552
a:3/16 inch (4.2 mm)
b:1/8 inches±1/32 inch
(3.0 mm±0.5 mm)
7
7-13