Hdd Settings]; Function Management Settings] - Konica Minolta Bizhub 652 User Manual

7.10 [Security Settings]
Administrator Settings
[Security] / [Administrator Password Setting] in Pa-
geScope Web Connection
CS Remote Care
If Enhanced Security settings is enabled, various security functions are configured to allow you to ensure
higher-level security of data management. For details, contact your service representative. To enable the en-
hanced security mode, the following settings must first be configured. Different screens appear depending
on the current settings.
7.10.6

[HDD Settings]

This setting is for the hard disk operations. For details, refer to the [User's Guide Box Operations].
7.10.7

[Function Management Settings]

Configure whether to use network functions that are difficult to count.
%
Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Function Manage-
ment Settings].
Settings
[Network Function Usage
Settings]
Factory default
[Network Function Usage
Settings]
bizhub 652/552
Settings to forcibly changed
[Administrator Password Setting] is not displayed.
Restricts the device setting in the remote mode
based on CS Remote Care.
[ON] Configure the settings for the network manage-
ment that are difficult to count.
[OFF] The following functions cannot be used if [Net-
work Function Usage Settings] is set to [OFF].
•
•
•
•
•
[ON]
PC-FAX transmission
Using the HDD TWAIN driver to view and re-
trieve documents in User Boxes
Using PageScope Box Operator to view and
retrieve documents in User Boxes
Using PageScope Scan Direct to retrieve
documents in User Boxes
Box operations using PageScope Web Con-
nection (The User Box tab does not appear.)
7
7-49