[Punch Vertical Position Adjustment]; [Punch Horizontal Position Adjustment] - Konica Minolta Bizhub 652 User Manual

7

[Punch Vertical Position Adjustment]

Adjust the vertical position of the punched holes for each paper size.
0 Before making any adjustments, create a sample using the punch settings. Adjust the position while
checking the created sample.
0 This adjustment is available if the Finisher FS-526 and Punch Kit PK-516 are installed.
1
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Finisher Adjustment] ö [Punch Vertical Position Adjustment].
2
Select the paper size to adjust the vertical punch position.
3
Press [+] or [-] to adjust the punched hole position while checking the sample.
4
Press [OK].
5
Create a sample, and check the print result.

[Punch Horizontal Position Adjustment]

Adjust the horizontal position of the punched holes as appropriate for each installed option or paper type.
0 Before making any adjustments, create a sample using the punch settings. Adjust the position while
checking the created sample.
0 The horizontal position of the punched holes can be adjusted as appropriate for each installed option
if the Finisher FS-526, Punch Kit PK-516 and Post Inserter are installed.
0 This adjustment is available for each paper type if the Finisher FS-527 and Punch Kit PK-517 are in-
stalled.
1
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment]
ö [Finisher Adjustment] ö [Punch Horizontal Position Adjustment].
% Select an option to adjust the horizontal position of the punched holes if the Post Inserter PI-505
is installed.
% First, select the paper type if the Finisher FS-527 and Punch Kit PK-517 are installed.
2
Press [+] or [-] to adjust the punched hole position while checking the sample.
3
Press [OK].
4
Create a sample, and check the print result.
7-16
[System Settings] 7.1
bizhub 652/552