Output Settings] - Konica Minolta Bizhub 652 User Manual

7.1 [System Settings]
7.1.2

[Output Settings]

Configure the settings for the output functions.
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Output Settings].
Settings
[Print/Fax Output Settings]
[Output Tray Settings]
[Shift Output Each Job]
Factory default
[Print/Fax Output Settings]
[Output Tray Settings]
[Shift Output Each Job]
bizhub 652/552
This setting is for the print and fax operations. For details, refer to the [Us-
er's Guide Network Scan/Fax/Network Fax Operations] and [User's Guide
Print Operations].
Configure an output tray given priority for outputting by function.
This item is available if the Finisher is installed.
Select whether to shift the output paper for each job.
This item is available if the Finisher is installed.
[Print]: [Page Print]
[Fax]: [Batch Print]
• [Copy]: [Tray 2]
• [Print]: [Tray 2]
• [Print Reports]: [Tray 1]
• [Fax]: [Tray 1]
[Tray 3] is displayed if the Job Separator JS-603 is installed in the Finisher
FS-527.
[Yes]
7
7-5