Network Settings]; Copier Settings] - Konica Minolta Bizhub 652 User Manual

7.5

[Network Settings]

7.5 [Network Settings]
This setting is for the network operations. For details, refer to the [User's Guide Network Administrator].
7.6

[Copier Settings]

Configure the settings used by the copy functions.
%
Press the Utility/Counter key ö [Administrator Settings] ö [Copier Settings].
Settings
[Auto Zoom (Platen)]
[Auto Zoom (ADF)]
[Specify Default Tray when
APS Off]
[Print Jobs During Copy
Operation]
[Tri-Fold Print Side]
[Automatic Image Rotation]
Factory default
[Auto Zoom (Platen)]
[Auto Zoom (ADF)]
[Specify Default Tray when
APS Off]
[Print Jobs During Copy
Operation]
[Tri-Fold Print Side]
[Automatic Image Rotation]
bizhub 652/552
Configure whether Auto Select is automatically selected when a paper tray
is selected manually while an original is placed on the Original Glass.
Configure whether Auto Select is automatically selected when a paper tray
is selected manually while an original is placed in the ADF.
Configure which paper tray to be selected when the APS (Auto Paper) set-
ting is canceled.
[Tray Before APS ON] Uses the paper tray specified before the APS was
selected.
[Default Tray] Uses Tray 1.
Configure whether to accept print data or fax data while a copy operation
is being performed.
[Accept] Accepts print data or fax data to print.
[Receive Only] Prints print data or fax data after the copy opera-
tion is finished.
Configure whether the printed side is on the inside or the outside when the
page is folded in three.
This adjustment is available if the Finisher FS-526 and Saddle Stitcher
SD- 508 are installed.
When the original orientation is different from paper orientation, the image
is rotated depending on the setting. Configure when the image is automat-
ically rotated.
[OFF]
[ON]
[Tray Before APS ON]
[Accept]
[Inside]
[When Auto Paper/Auto Zoom is set]
7
7-39