Reset Settings] - Konica Minolta Bizhub 652 User Manual

7
7.1.9

[Reset Settings]

Configure auto reset settings.
0 All settings performed in the following tabs during operation using the copy function are automatically
reset to the initial settings after the specified time has elapsed.
[Basic], [Original Setting], [Original Type], [Application]
0 Even if [OFF] is selected for System Auto Reset Time, the system auto reset function operates when
this machine is not used for one minute during user authentication/account track operations.
%
Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Reset Settings].
Settings
[System Auto Reset]
[Auto Reset]
[Job Reset]
7-22
[Priority Mode] Configure a mode to be displayed in the system
auto reset mode.
[System Auto Reset Configure whether to perform system auto reset.
Time] Specify a time until the initial screen appears if
this machine is not operated. The specified time
is not canceled.
Configure whether to perform auto reset in the selected mode.
Specify a time until the basic settings screen appears and the settings are
reset to the initial values if this machine is not operated.
[When Account is Configure whether to reset the settings when you
changed] log off if the user authentication or account track
settings have been configured.
[When original is set Configure whether to reset the settings when an
on ADF] original is loaded in the ADF.
[Next Job] Configure whether to reset the following settings
when the next job is selected.
•
•
•
The destination of data is always reset.
[System Settings]
d
Reference
If user authentication or enhanced se-
curity mode is enabled, the adminis-
trator settings mode or user
authentication mode is logged off ac-
cording to the setting for System Auto
Reset Time.
In the enlarge display mode, the sys-
tem auto reset mode is disabled.
[Staple Setting]
[Original Set/Bind Direction]
[Reset Data After Job]
7.1
bizhub 652/552