Konica Minolta Bizhub 652 User Manual page 133

6.1 [System Settings]
Settings
[Auto Paper Select for
Small Original]
[Blank Page Print Settings]
[Page Number Print Posi-
tion]
[Select Keyboard]
Factory default
[Language Selection]
[Measurement Unit Set-
tings]
[Auto Tray Selection Set-
tings]
[Auto Tray Switch ON/OFF]
[No Matching Paper in Tray
Setting]
[Print Lists]
[Post Inserter Settings]
[Auto Color Level Adjust.]
[Low Power Mode Set-
tings]
[Sleep Mode Settings]
[Print/Fax Output Settings]
[Output Tray Settings]
[AE Level Adjustment]
[Auto Paper Select for
Small Original]
[Blank Page Print Settings]
[Page Number Print Posi-
tion]
bizhub 652/552
Specify the paper size to be used for a case where the original placed on
the Original Glass is too small to be detected in Auto Paper mode.
[Copy on Small Size] Prints on 5-1/2 e 8-1/2 (A5) size paper.
•
[Copy on Letter] Prints on 8-1/2 e 11 (A4) size paper.
[Copy on A4]
[Prohibit Copy] Starts printing when a paper tray is selected man-
ually and the Start key is pressed.
Appears when user access is permitted under [Administrator Settings]. For
details, refer to page 7-25.
Specify a page number print position when printing page numbers after
configuring 2-sided print or booklet settings. Select whether to print the
page numbers on a same position on all pages or on positions symmetric
with respect to the stapling position.
Select the keyboard type displayed by default in the Touch Panel.
[English]
This value varies depending on the area.
[Tray Priority]
[Tray 1] ö [Tray 2] ö [Tray 3] ö [Tray 4] ö [LCT]
[LCT] is displayed when the optional LCT is installed.
[Restrict]
[Stop Printing (Tray Fixed)]
• Tray 1
• [1-Sided]
[Paper Tray]: [F1]
[Paper Type]: [Plain Paper]
[Paper Size]: [Auto Detect]
Standard (3)
15 min.
30 min.
[Print]: [Page Print]
[Fax]: [Batch Print]
• [Copy]: [Tray 2]
• [Print]: [Tray 2]
• [Print Reports]: [Tray 1]
• [Fax]: [Tray 1]
[Output Tray] is displayed when the Finisher FS-526 or Finisher FS-527 is
installed.
[Tray 3] is displayed when the Job Separator JS-603 is installed in the Fin-
isher FS-527.
Standard (2)
[Prohibit Copy]
[Do Not Print]
[Left & Right Bind: All the Same Top & Bottom Bind: All the Same]
If 5-1/2 e 8-1/2 (A5) size paper is not loaded in
the tray, a message appears instructing you to
load 5-1/2 e 8-1/2 (A5) size paper in the by-
pass tray.
6
6-5