10.1
Using an authentication unit (biometric type)
8
Register finger vein patterns.
% Scan a finger vein pattern three times; reset the same finger and then press [Start Reading] for each
scanning.
% After scanning the finger vein patterns, place the same finger, and click [Authentication Test].
% If the authentication test has succeeded, press [Register].
% If the authentication test has failed, place your finger on the authentication unit again, and click [Au-
thentication Test].
% If the authentication has failed, click [Reset] to repeat the scanning process.
For Authentication Unit AU-101
For Authentication Unit AU-102
9
Click [Registration].
bizhub 652/552
10
10-15