Konica Minolta Bizhub 652 User Manual
  1. Manuals
  2. Brands
  3. Konica Minolta Manuals
  4. All in One Printer
  5. bizhub 652
  6. User manual

Konica Minolta Bizhub 652 User Manual

Copy operations
Hide thumbs Also See for Bizhub 652:
Table of Contents

Advertisement

Quick Links

See also: User Manual , Manual
User's Guide
Copy Operations

Advertisement

Table of Contents
loading

Related Manuals for Konica Minolta Bizhub 652

Summary of Contents for Konica Minolta Bizhub 652

  • Page 1 User’s Guide Copy Operations...

  • Page 3: Table Of Contents

    Copy operations using multiple functions ..................3-7 Functions that cannot be combined ....................3-9 Control Panel Keys Control Panel and functions ......................4-3 About Start, Stop, and Interrupt ....................4-5 Start ..............................4-5 Stop..............................4-5 Interrupt.............................. 4-5 Reset ..............................4-5 bizhub 652/552 Contents-1...
  • Page 4 [Book Copy/Repeat]......................... 5-34 [Book Copy] ............................. 5-34 [Image Repeat]..........................5-35 [Booklet Original]..........................5-36 5.4.4 [Page Margin] ........................... 5-37 5.4.5 [Image Adjust] ..........................5-39 5.4.6 [Booklet] ............................5-39 5.4.7 [Erase] .............................. 5-41 [Frame Erase] ........................... 5-41 [Non-Image Area Erase]........................5-41 Contents-2 bizhub 652/552...
  • Page 5 [1st Z-Fold Position Adjustment] ..................... 7-18 [2nd Z-Fold Position Adjustment] ....................7-19 [Punch Unit Size Detect Sensor]...................... 7-19 [Gradation Adjustment] ........................7-20 7.1.8 [List/Counter] ........................... 7-21 7.1.9 [Reset Settings] ..........................7-22 7.1.10 [User Box Settings] .......................... 7-23 bizhub 652/552 Contents-3...
  • Page 6 8.1.2 Loading paper............................ 8-4 Loading paper into Tray 1 and Tray 2....................8-4 Loading paper into Tray 3 and Tray 4....................8-5 Loading paper into the Bypass Tray ....................8-5 Loading paper into the LCT ....................... 8-7 Contents-4 bizhub 652/552...
  • Page 7 Registering a user using Data Administrator ................... 11-7 Checking the version of the installed Data Administrator..............11-7 Setup..............................11-8 User registration..........................11-12 11.1.3 Logging in to this machine......................11-16 When [Card Authentication] is enabled..................11-16 When [Card Authentication + Password] is enabled ..............11-17 bizhub 652/552 Contents-5...
  • Page 8 Specifications 12.1 Paper .............................. 12-3 Paper types and paper capacities ....................12-3 12.2 Machine specifications......................... 12-5 bizhub 652/552 ..........................12-5 Automatic Duplex Unit ........................12-7 Reverse Automatic Document Feeder ..................... 12-8 12.3 Options............................12-9 Large Capacity Unit LU-301 ......................12-9 Large Capacity Unit LU-204 ......................

  • Page 9: Introduction

    Introduction...

  • Page 11: Welcome

    This manual describes details on the fax driver func- tion that transmits faxes directly from a computer. • PC-FAX [User's Guide Network Administrator] This manual describes details on setting methods for each function using the network connection. • Network settings • Settings using PageScope Web Connection bizhub 652/552...

  • Page 12: User's Guide

    Note that basic technical knowledge about the product is required to enable users to perform maintenance work or troubleshooting operations. Limit your maintenance and troubleshooting operations to the areas ex- plained in this manual. Should you experience any problems, please contact your service representative. bizhub 652/552...

  • Page 13: Conventions Used In This Manual

    The operation procedures are % This symbol indicates a supplementary explanation of a pro- described using illustrations. cedural instruction. This symbol indicates transition of the control panel to access a desired menu item. This symbol indicates a desired page. bizhub 652/552...

  • Page 14: Key Symbols

    X side the length. Original and paper indications w indicates the paper size with the length (X) being longer than the width (Y). v indicates the paper size with the length (X) being shorter than the width (Y). bizhub 652/552...

  • Page 15: Part Names And Their Functions

    Part names and their functions...

  • Page 17: Option Configuration

    The original is scanned by the scanner section, and the scanned image is printed by the printer section. The main unit is hereinafter referred to as "this ma- chine", "main unit", or bizhub 652/552 through the manual. Authentication Unit (biometric type) Performs user authentication by scanning vein pat- terns in the finger.
  • Page 18 Enables PDF document encryption with a digital ID, at- i-Option LK-102 taching of a digital signature, and property settings when distributing a PDF document using the scan or User Box function. bizhub 652/552...
  • Page 19 Control Panel of this machine, up to nine. Installed in the unit to prevent humidity from collecting Dehumidifier Heater HT-508 in the paper. • This option may not be available depending on the sales area. bizhub 652/552...

  • Page 20: Main Body

    Left-Side Cover Release Lever Left-Side Cover Lateral Guide Original Tray Original Output Tray Sub Power Switch USB Port (Type A) USB2.0/1.1 USB Port (Type A) USB2.0/1.1 (For compact keyboard) Automatic Duplex Unit Lock Release Lever Automatic Duplex Unit bizhub 652/552...
  • Page 21 Bypass Tray Door Release Lever Lower Right-Side Door Lower Right-Side Door Release Lever Paper-Empty Indicator Total Counter Main Power Switch Tray 4 Tray 3 Tray 2 Tray 1 Lower Front Door Upper Front Door Output Tray Status Indicator bizhub 652/552...

  • Page 22: Outside Of The Main Body (Rear)

    Jack for connecting a telephone (TEL PORT2) Telephone Jack 2 (LINE PORT2) Jack for connecting a telephone (TEL PORT1) Telephone Jack 1 (LINE PORT1) USB Port (Type A) USB2.0/1.1 RS-232C Port USB Port (Type B) USB2.0/1.1 Network Connector (10Base-T/100Base-TX/1000Base-T) Ozone Filter bizhub 652/552...

  • Page 23: Main Body Inside

    Main Body 2.2.3 Main body Inside Name Original Glass Fusing Unit Fusing Unit Cover Lever Print Head Glass Cleaning Tool Waste Toner Box Drum Unit Toner Cartridge Slit Glass Original Scale Jam Removal Dial Slit Glass Cleaner bizhub 652/552...

  • Page 24: Control Panel

    Main Body 2.2.4 Control Panel Name Stylus Pen Touch Panel Power Indicator Sub Power Switch Function key Data Indicator Keypad Brightness adjustment dial 2-10 bizhub 652/552...

  • Page 25: Adjusting The Angle Of The Control Panel

    You can tilt the angle of the Control Panel to one of the three po- sitions. To tilt the Control Panel to the left or right, hold the bottom of the Control Panel, and then tilt the panel to the left or right. bizhub 652/552 2-11...

  • Page 26: Touch Panel

    Do not apply excessive pressure on the Touch Panel. Such impact may leave a flaw on the panel, inviting damage to the Touch Panel. When operating in the Touch Panel, never press down on the touch panel with force or with a pointed object such as a mechanical pencil. Basic tab Quick Copy tab 2-12 bizhub 652/552...
  • Page 27 Press the Utility/Counter key ö [User Settings] ö [Custom Display Settings] ö [Copier Settings] ö [Default Tab]. To configure color selection settings for buttons and tabs: Press the Utility/Counter key ö [User Settings] ö [Custom Display Settings] ö [Color Selection Settings]. bizhub 652/552 2-13...

  • Page 28: Option

    Option Option 2.3.1 Finisher FS-526/Saddle Stitcher SD-508/Punch Kit PK-516 2-14 bizhub 652/552...
  • Page 29 Jam Removal Dial [FN2] Guide Lever [FN1] Staple Replacement Door Guide Lever [FN13] Guide Lever [FN14] Exit Cover * Press the output tray switch to move folded and center stapled paper to the end of the folding output tray. bizhub 652/552 2-15...

  • Page 30: Job Separator Js-602

    Option 2.3.2 Job Separator JS-602 Name Output Tray Job Separator Cover 2-16 bizhub 652/552...

  • Page 31: Z Folding Unit Zu-606

    Option 2.3.3 Z Folding Unit ZU-606 Name Z Folding/Conveyance Unit Guide Lever [FN1] Punch Scrap Box Front Door Guide Lever [FN6] Guide Lever [FN7] Guide Lever [FN8] Recessed Pull [FN2] Jam Removal Dial [FN5] bizhub 652/552 2-17...

  • Page 32: Post Inserter Pi-505

    Option Name Guide Lever [FN3] Jam Removal Dial [FN4] 2.3.4 Post Inserter PI-505 Name Post Inserter Control Panel Lower Tray Paper Guide Lower Tray Upper Tray Upper Tray Paper Guide Upper Unit Release Lever 2-18 bizhub 652/552...

  • Page 33: Finisher Fs-527/Saddle Stitcher Sd-509/Punch Kit Pk-517/Job Separator Js-603

    Option 2.3.5 Finisher FS-527/Saddle Stitcher SD-509/Punch Kit PK-517/Job Separator JS-603 bizhub 652/552 2-19...
  • Page 34 Option Name Output Tray 2 Output Tray 1 Front Door Horizontal Transport Unit Cover Stapler Guide Lever [FN3] Jam Removal Dial [FN2] Guide Lever [FN1] Guide Lever [FN4] Staple Holder Punch Scrap Box 2-20 bizhub 652/552...
  • Page 35 Option Name Saddle Stitcher Jam Removal Dial [FN6] Recessed Pull [FN5] Transport Unit Punch Kit Job Separator Staple Cartridge Recessed Pull [FN7] Folding Output Tray bizhub 652/552 2-21...

  • Page 36: Large Capacity Unit Lu-301/Lu-204

    Option 2.3.6 Large Capacity Unit LU-301/LU-204 Name Jam Removal Cover Upper Door Paper Take-Up Roller Paper-Empty Indicator Release Lever 2-22 bizhub 652/552...

  • Page 37: Using This Machine

    Using this machine...

  • Page 39: Turning On Or Off The Machine

    To turn the power on, open the Main Power Switch Cover, then press n on the Main Power Switch. Close the Main Power Switch Cover. Press the Sub Power Switch. Check that the Touch Panel is turned on. bizhub 652/552...
  • Page 40 Turning on or off the machine To turn the power off, press the Sub Power Switch, then the Main Power Switch. Reference To change the default settings for Copy: Press the Utility/Counter key ö [User Settings] ö [Copier Settings] ö [Default Copy Settings]. bizhub 652/552...

  • Page 41: Basic Copy Operations

    % If the original is loaded in any orientation other than with the top of the original toward the back of the machine, be sure to select the original orientation. Slide the adjustable Lateral Guide against the edges of the original. bizhub 652/552...

  • Page 42: Placing The Original On The Original Glass

    The original is scanned and copied. % To interrupt the copy operation being performed, press the Stop key. % A [Ready to accept another job.] message that appears during the current printing job indicates that the next original can be scanned. bizhub 652/552...

  • Page 43: Copy Operations Using Multiple Functions

    This section describes copy operations using combination of functions. Load the original. Press [Original Setting]. % For details on [Original Setting], refer to page 5-18. Press [Basic] ö [Duplex/Combine]. % For details on [Duplex/Combine], refer to page 5-9. bizhub 652/552...
  • Page 44 % For details on [Auto Rotate OFF], refer to page 5-17. Press [Application] and then configure settings for respective functions. % For details on [Application], refer to page 5-22. Press [Basic] ö [Finishing]. % For details on [Finishing] or [Fold/Bind], refer to page 5-12. bizhub 652/552...

  • Page 45: Functions That Cannot Be Combined

    Some settings cannot be combined with each other. If they are combined improperly, the settings will be giv- en priorities in either of the two ways described below. The setting configured last is given priority. (The setting specified first is canceled.) The setting configured first is given priority. (A warning message appears.) bizhub 652/552...
  • Page 46 Basic copy operations 3-10 bizhub 652/552...

  • Page 47: Control Panel Keys

    Control Panel Keys...

  • Page 49: Control Panel And Functions

    Power Save key again. Allows you to register (store) the desired p. 4-8 Mode Memory copy/fax/scan settings as a program or to recall a registered program. Utility/Counter Switches to the Utility screen or the Meter Count p. 4-7 screen. bizhub 652/552...
  • Page 50 Guide Network Scan/Fax/Network Fax Opera- tions]. Copy Press this key to enter Copy mode. (As a default, the p. 4-6 machine is in Copy mode.) While the machine is in Copy mode, the indicator on the Copy key lights up in green. bizhub 652/552...

  • Page 51: About Start, Stop, And Interrupt

    The copy settings return to those specified before the interrupting copying job. Reset Press this key to reset all settings (except programmed settings) entered using the Control Panel and Touch Panel. Press the Reset key. The basic settings screen appears. bizhub 652/552...

  • Page 52: About Copy, Fax/Scan, And User Box

    For details on the fax/scan function, refer to the [User's Guide Network Scan/Fax/Network Fax Opera- tions]. User Box Press this key to enter User Box mode. For details on User Box functions, refer to the [User's Guide Box Operations]. bizhub 652/552...

  • Page 53: Utility/Counter

    Displays information about this machine. [Function Version]: Allows you to check the function version of the currently installed firmware. [IPv4 Address]: Allows you to check the currently specified IPv4 address. [IPv6 Address]: Allows you to check the currently specified IPv6 address. bizhub 652/552...

  • Page 54: Mode Memory

    Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Restrict User Access] ö [Copy Program Lock Settings]. To delete a program: Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Restrict User Access] ö [Delete Saved Copy Program]. bizhub 652/552...

  • Page 55: Access

    The users, who belong to the suspended account, cannot also log in to this machine. If authentication is performed with PageScope Authentication Manager, check with your server ad- ministrator for information on the login procedure. Press the Access key. Screen for user authentication bizhub 652/552...
  • Page 56 [Pass- word] and then enter the password. • After entering numbers from the keypad, press [Password] to enter alphabets and sym- bols in succession. [Login] Displays the basic settings screen, enabling you to use this machine. 4-10 bizhub 652/552...

  • Page 57: Using The Machine During Non-Scheduled Hours

    Using the keypad, enter the length of time to elapse before the machine enters Sleep mode again. Press [OK]. The basic settings screen appears. Reference To configure Weekly Timer: Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Weekly Timer Settings]. bizhub 652/552 4-11...

  • Page 58: Power Save

    The machine returns from Low Power mode when any other key on the Control Panel or the Touch Panel surface is pressed. Reference To enable Low Power mode: Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Power Save Settings]. 4-12 bizhub 652/552...

  • Page 59: Accessibility

    To perform adjustment again, press the C (Clear) key, and then press the four check point buttons [+] again. • To cancel the Touch Panel adjustment process, press the Stop or Re- set key. • If the touch panel cannot be adjusted, contact your service represent- ative. bizhub 652/552 4-13...
  • Page 60 [Severe Caution Sound]: A sound produced when a door or cover is opened or when an error occurs that requires action by a service rep- resentative [Default Enlarge Display For details, refer to the [User's Guide Enlarge Display Operations]. Settings] 4-14 bizhub 652/552...

  • Page 61: Enlarge Display

    For details on the Enlarge Display screen, refer to the [User's Guide Enlarge Display Operations]. Press the Enlarge Display key to return to normal display. If PageScope Authentication Manager is used for authentication, the login screen cannot be switched to the enlarged display mode. Press the Enlarge Display key. bizhub 652/552 4-15...

  • Page 62: Guidance

    Check descriptions by selecting a Guidance menu grouped by useful func- tion. [Name and Function of Check the description of the main unit and its options. Parts] [Service/Admin. Informa- Check the [Admin. Name], [Extension No.], and [E-Mail]. tion] 4-16 bizhub 652/552...

  • Page 63: C (Clear)

    [Start Guidance]. 4.10 C (Clear) Clears a value (such as the number of copies, a zoom ratio and size) entered using the keypad. Press the C (Clear) key. The value is deleted. Enter the correct value. bizhub 652/552 4-17...

  • Page 64: Proof Copy

    Stored job registration is performed when the System Auto Reset function is activated or one minute after (if System Auto Reset is set to [OFF]). Press the Proof Copy key to repeat proof copy. Press [Print]. The number of copies yet to be printed is registered as a copy job. 4-18 bizhub 652/552...

  • Page 65: Using A Preview Image To Check The Copy Result (Advanced Preview)

    Pressing rotates the currently displayed page. Pressing [Rotate Pages] displays the Scanned Page List. Select the page to be rotated. Up to six scanned pages can be displayed. Press [ ] or [ to change the selection. bizhub 652/552 4-19...
  • Page 66 Switch between the [View Status] and [View Pages] tab in the Preview screen. Use [View Pages] to enable [Rotate Displayed Page] or [Change Setting], and stop scanning on [View Status]. Press the Start key. Select this menu to start printing. 4-20 bizhub 652/552...

  • Page 67: Copy Function

    Copy Function...
  • Page 69 Configure the application settings for making copies. p. 5-22 Left panel [Job List] Check jobs currently being performed p. 5-60 and jobs waiting to be performed. [Check Job] Check the current settings and the result p. 5-62 of the settings. bizhub 652/552...

  • Page 70: Basic]

    Display the Language Selection screen to specify the language to be displayed on the Touch Panel. This item is not displayed when two shortcut keys are configured. [Shortcut Key] Allows you to arrange shortcut keys for the frequently used Appli- cation functions on the Basic screen. bizhub 652/552...

  • Page 71: Density/Background]

    (newsprints, recycle paper, etc.) or originals on thin paper showing text or images from the back. [Background Removal] Normally [Bleed Removal] is selected. However, when copying an original with colored background, select [Paper Discoloration Adj] to make adjust- ments for background removal for copying. bizhub 652/552...

  • Page 72: Paper]

    Specify a paper size to use the bypass tray as a paper tray dedicated to the paper size. [Custom Size] (only for [Bypass Tray]): Enter the paper size. [Wide Paper]: Select a paper size larger than the original. bizhub 652/552...

  • Page 73: Configuring A Custom Size

    Press [Basic] ö [Paper] ö [Bypass Tray] ö [Change Tray Settings] ö [Wide Paper]. Settings [Wide Paper] Select the size of the paper to be loaded. [Change Size] [X]/[Y] Enter the length [X] and width [Y] of the paper. Preset Paper Sizes Enables [12e18 w] to be selected. bizhub 652/552...

  • Page 74: Zoom]

    [User Preset Zoom] Select a registered copy zoom value. To change the registered zoom val- ues, use [Set Zoom]. Reference To set image rotation: Press the Utility/Counter key ö [User Settings] ö [Copier Settings] ö [Enlargement Rotation]. bizhub 652/552...

  • Page 75: Duplex/Combine]

    Using the [Duplex/Combine] function, you can save paper sheets for copying. Press [Basic] ö [Duplex/Combine]. Settings [1-Sided > 1-Sided] [2-Sided > 1-Sided] [1-Sided > 2-Sided] [2-Sided > 2-Sided] bizhub 652/552...
  • Page 76 Original Glass. Without setting [Original Direction], the resulting copy may not be what you intended. [No] Disables combined copy. [2in1] Copies images on two original pages on one sheet of paper. Portrait original pages Landscape original pages 5-10 bizhub 652/552...
  • Page 77 Copies images of four original pages on one sheet of paper. <Horizontal> <Vertical> [8in1] Copies images of eight original pages on one sheet of paper. <Horizontal> <Vertical> [Horizontal] Specify the combine order of the original (Num- bering Direction setting). [Vertical] bizhub 652/552 5-11...

  • Page 78: Finishing]

    Settings [Sort] When multi-page originals are copied for multiple sets, copies can be fed out sorted by set of copies. [Group] When multi-page originals are copied for multiple sets, copies can be fed out sorted by pages. 5-12 bizhub 652/552...
  • Page 79 When the Saddle Stitcher SD-509 is installed in the Finisher FS-527: [Half-Fold] [Center Staple & Fold] [Staple] Staples copies in corner or at two points before they are output. [Punch] Punches holes in copies before they are output. bizhub 652/552 5-13...

  • Page 80: Post Inserter

    Only the lower tray can be used as the output tray. The upper tray is not available. Keys on control panel Name Corner Staple Lamp Center Staple & Fold Lamp [Finishing] 2-Hole Lamp 3-Hole Lamp [Select punch] [Start/stop] 4-Hole Lamp Tri-Fold Lamp 2 position staple lamp 5-14 bizhub 652/552...

  • Page 81: Finishing Using Post Inserter

    [Select punch] key to turn the LED on. % Punch settings are available together with the corner staple or 2-staple option. Press the [Start/stop] key. % If the [Start/stop] key is pressed during operation, the operation will be stopped. bizhub 652/552 5-15...

  • Page 82: Separate Scan]

    Repeat Step 4 until all pages of the original are scanned. After all original pages have been scanned, press [Finish]. Press the Start key. Reference To set the Separate Scan output method: Press the Utility/Counter key ö [User Settings] ö [Copier Settings] ö [Separate Scan Output Method]. 5-16 bizhub 652/552...

  • Page 83: Auto Rotate Off]

    Select this setting to copy the original according to the paper orientation without rotating the image. For some paper sizes or zoom values, part of the image may be cut off. Press [Basic] ö [Auto Rotate OFF]. bizhub 652/552 5-17...

  • Page 84: Original Setting]

    ADF or placed on the Original Glass. [Despeckle] Reduces the influence of a dirt of the Slit Scan Glass upon a copy output when loading an original in the ADF. 5-18 bizhub 652/552...

  • Page 85: Copying Mixed Originals

    8-1/2 e 11 v (A4v) 8-1/2 e 14 w (B4w) 8-1/2 e 11 w (A4w) 5-1/2 e 8-1/2 v (A5 v) 5-1/2 e 8-1/2w (A5 w) (B5 v) (B5 w) Possible to combine Not possible to combine bizhub 652/552 5-19...

  • Page 86: Copying Z-Folded Originals

    Press [Z-Folded Original]. % To cancel the setting, press [Z-Folded Original] again to dese- lect it. [Original Type] Select the setting for the image type of the original to better adjust the copy quality. Press [Original Type]. 5-20 bizhub 652/552...
  • Page 87 +. To emphasize the background image, press [Lighter Text] to adjust the set- ting toward -. [Text Enhancement] can be configured when an item other than [Photo] is selected. [Glossy] Makes copies with a glossy finish. bizhub 652/552 5-21...

  • Page 88: Application]

    Copies the contents of the front and back sides of a card-size orig- p. 5-57 inal, for example, insurance card, driver's license, or business card, on one sheet. [Save in User Box] Saves the scanned original data in a User Box. p. 5-58 5-22 bizhub 652/552...

  • Page 89: Sheet/Cover/Chapter Insert]

    Set the [Paper Type] of the Bypass Tray to [Transparency] and press [OK]. Press [Application] ö [Sheet/Cover/Chapter Insert] ö [OHP Interleave]. Settings [Interleave Paper] Select the paper tray loaded with paper with a transparency interleaf. [Transparency] Indicates the paper size of the loaded transparency. bizhub 652/552 5-23...

  • Page 90: [Cover Sheet]

    Select the paper tray loaded with the paper for the front/back cover page or blank cover pages. You can select the paper tray of the Post Inserter when [Front (Blank)] or [Back (Blank)] is selected while the optional Post Inserter is installed. 5-24 bizhub 652/552...

  • Page 91: [Insert Sheet]

    Leaves the back side of the first page of the copy blank, inserts the specified paper for the second page of the copy, and makes a 2-sided copy of the sec- ond and third pages of the original onto the inserted sheet. bizhub 652/552 5-25...
  • Page 92 For 2-sided copy: Leaves the back side of the second page of the copy blank, and inserts the specified paper for the third page of the copy. Reference To configure the 2-sided copy mode: Press [Basic] ö [Duplex/Combine]. 5-26 bizhub 652/552...

  • Page 93: [Insert Image]

    Press [Application] ö [Sheet/Cover/Chapter Insert] ö [Insert Image]. Settings [P---] Specify the position to insert the page scanned through the Original Glass. [Sort] Sorts specified pages in the ascending order. Press the Start key. Place the original to be inserted on the Original Glass. bizhub 652/552 5-27...

  • Page 94: [Chapters]

    Enable the Chapters function to set [1-Sided > 2-Sided]. For a 2-sided original, select [2-Sided > 2-Sid- ed]. Make sure that the paper loaded for the first page of the chapter and for text copies have the same size and orientation. 5-28 bizhub 652/552...

  • Page 95: [Program Jobs]

    Up to 100 types of originals can be scanned. When configuring a program job, the [Group] setting cannot be selected in the [Finishing] screen. In- stead, select [Sort]. bizhub 652/552 5-29...
  • Page 96 Load the next original and press [Change Setting]. Select the desired copy settings, and then press the Start key. % Repeat Steps 3 to 5 until all originals have been scanned. After all original pages have been scanned, press [Finish]. Press [Yes]. 5-30 bizhub 652/552...

  • Page 97: Edit Image]

    Use this function to enable the original to be copied with the density and gradations of the image inversed. The images in the original are copied and output reversed like negative film of photographs. Press [Application] ö [Edit Image] ö [Neg./Pos. Reverse]. % To cancel the Neg./Pos. Reverse function, press [Neg./Pos. Reverse] again. bizhub 652/552 5-31...

  • Page 98: [Mirror Image]

    [Original Size] Select [Auto] to detect the size of the original automatically. If the size of the original is not automatically detected, select the original size. [Custom Size] Enter the original size. [Photo Size] Select the photo size. 5-32 bizhub 652/552...

  • Page 99: [Image Adjustment]

    You can make an overly sharp original image softer or a blurry image clearer. Configure respective functions. % Press [Sample Copy] to see how it will appear with the currently specified quality adjustment set- tings. bizhub 652/552 5-33...

  • Page 100: Book Copy/Repeat]

    [Front and Back Cover] Copies the front cover, separate copies of each page in the page spreads and the back cover in the original page order. 5-34 bizhub 652/552...

  • Page 101: [Image Repeat]

    Repeats copying of the scanned area of the original so that the sheet is filled with the copied image. However, some parts of the image may be lost. [Auto Detect] Automatically detects the area to be scanned. bizhub 652/552 5-35...

  • Page 102: [Booklet Original]

    Load the original. % To use the Original Glass, position the pages in order, starting with the side that includes the first page, then the side that includes the second page, then the side that includes the third page. 5-36 bizhub 652/552...

  • Page 103: Page Margin]

    If the positions of the staples or punched holes are different from the binding position, the positions of the staples or punched holes are given priority. If part of the image is lost when copied with the specified binding margin settings, reduce the zoom and perform copying. bizhub 652/552 5-37...
  • Page 104 [None] is selected, the binding margin width is set to 0 mm. [Original Direction] Select the orientation of the original loaded into the ADF or placed on the Original Glass. Reference To set the zoom: Press [Basic] ö [Zoom]. 5-38 bizhub 652/552...

  • Page 105: Image Adjust]

    The page order of the scanned original is automatically arranged to produce 2-sided 2 in 1 copies in a page layout for center binding, such as for a magazine. [Left Bind] [Right Bind] Center Staple & Fold or Half-Fold is available if the Saddle Stitcher is installed in the optional Finisher. bizhub 652/552 5-39...
  • Page 106 Reference To specify Auto Display Zoom Ratio: Press the Utility/Counter key ö [User Settings] ö [Copier Settings] ö [Auto Zoom for Combine/Booklet]. 5-40 bizhub 652/552...

  • Page 107: Erase]

    You can place the original on any position without opening or closing the ADF so that you can make copies promptly. In addition, toner consumption will be reduced as the area outside the original text is erased. bizhub 652/552 5-41...
  • Page 108 The original image may be defected at its top or end. Press [Application] ö [Erase] ö [Non-Image Area Erase]. Reference To set Erase Operation: Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Erase Adjustment]. 5-42 bizhub 652/552...

  • Page 109: Stamp/Composition]

    The date/time stamp cannot be printed on blank pages inserted using the Cover Sheet, Insert Sheet and Chapters functions. Change the setting for printing on blank pages in Administrator Settings to en- able blank page printing. The date/time as of scanning the original is stamped on the paper. bizhub 652/552 5-43...
  • Page 110 Page numbers cannot be printed on blank pages inserted using the Cover Sheet, Insert Sheet and Chapters functions. Change the setting for printing on blank pages in Administrator Settings to enable blank page printing. 5-44 bizhub 652/552...
  • Page 111 Select a position from the nine print position options. [Adjust Position] Adjust horizontal and vertical positions to be be- tween 1/16 inch (0.1 mm) and 1-15/16 inch (50.0 mm). [Text Details] Set the text size and type. bizhub 652/552 5-45...
  • Page 112 Select the character size used for the stamp. [Print Position] Select a position from the nine print position options. [Adjust Position] Adjust horizontal and vertical positions to be be- tween 1/16 inch (0.1 mm) and 1-15/16 inch (50.0 mm). 5-46 bizhub 652/552...

  • Page 113: [Copy Protect]

    Select Yes to print the serial number of this ma- chine. For details on setting for the serial number, contact your service representative. [Distribution Control Prints the distribution control number. Number] Specify the distribution control number using a val- ue between 1 and 99999999. bizhub 652/552 5-47...

  • Page 114: [Copy Guard]

    [Preset Stamp], [Date/Time], and [Other] can be selected together. In [Preset Stamp], multiple copy guards cannot be selected. A copy guard cannot be printed on a colored paper, envelope, or transparency film. Press [Application] ö [Stamp/Composition] ö [Copy Security] ö [Copy Guard]. 5-48 bizhub 652/552...

  • Page 115: [Password Copy]

    If a password is detected on copies with Zoom, Image Adjustment, Colored Paper, Envelope, or Trans- parency specified, the currently processed copy job will be erased. If multiple originals with different passwords are scanned, you will need to enter a password for each original. bizhub 652/552 5-49...

  • Page 116: [Stamp Repeat]

    The selected stamps appear in the order they are placed, and can be used in combination for up to eight text lines. Use PageScope Web Connection or Copy Protection Utility to register a registered stamp. Multiple registered stamps or preset stamps cannot be selected. 5-50 bizhub 652/552...
  • Page 117 Stamp Repeat text to be deleted. Reference To delete a registered stamp: Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Stamp Settings] ö [De- lete Registered Stamp]. bizhub 652/552 5-51...

  • Page 118: [Header/Footer]

    [Text Details] Select [Text Size] and [Text Type]. [Reset] Reset the settings to the initial contents. Reference To register a header/footer: Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Stamp Settings] ö [Head- er/Footer Settings]. 5-52 bizhub 652/552...

  • Page 119: [Watermark]

    In case other settings affect the watermark printing to cause partial loss, the Watermark function is can- celed upon copying. Press [Application] ö [Stamp/Composition] ö [Watermark]. Settings [Watermark Type] Select a watermark from the eight types available. The watermark selected is printed over the original image. bizhub 652/552 5-53...

  • Page 120: [Overlay]

    Composes the original as the background. The position (Original)] overlay image is superimposed on the original when they are printed. [Back] Composes the overlay image as the background. The original is superimposed on the overlay image when they are printed. 5-54 bizhub 652/552...

  • Page 121: [Registered Overlay]

    This function enables storing of an image from the scanned original as a registered overlay on the hard disk for later use in copying another original. It is useful to register frequently used overlay images. Press [Application] ö [Stamp/Composition] ö [Registered Overlay]. bizhub 652/552 5-55...
  • Page 122 [Photo Size] Select the photo size. Reference To prohibit changing the overlay registration: Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Restrict User Access] ö [Restrict Access to Job Settings] ö [Change Registered Overlay]. 5-56 bizhub 652/552...

  • Page 123: Card Shot]

    You can copy a card with the full size or enlarge an image to fit paper. Reference To specify the default of Card Copy: Press the Utility/Counter key ö [Administrator Settings] ö [Copier Settings] ö [Card Shot Settings]. bizhub 652/552 5-57...

  • Page 124: Save In User Box]

    A name automatically assigned to the document appears. You can change the file name. [Save & Print] [Yes]: Select to copy the scanned original and save it in the specified User Box. [No]: Select to save the data of the scanned original in the specified User Box. 5-58 bizhub 652/552...

  • Page 125: Left Panel Display

    Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö [Hide Personal Information]. To delete all job logs: Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö [Ini- tialize] ö [Job History]. bizhub 652/552 5-59...

  • Page 126: Job List]

    [Receive] Opens the screen for checking fax reception jobs. For details, refer to the [User's Guide Network Scan/Fax/Network Fax Operations]. [Save] Opens the screen for saving jobs. For details, refer to the [User's Guide Box Operations]. 5-60 bizhub 652/552...
  • Page 127 Displays only jobs that were completed nor- mally. [All Jobs] Displays all jobs. [Detail] Check the status, results, error details, user name, queued time, completed time, number of original pages and number of copies for jobs in the Job History list. bizhub 652/552 5-61...

  • Page 128: Check Job]

    From the Check Job Settings screens, the current copy settings can be checked and changed if desired. Press [Check Job] ö [Check Details]. Check the copy settings. To change the copy settings, press the relevant button. After checking the settings, press [Close]. 5-62 bizhub 652/552...

  • Page 129: User Settings]

    [User Settings]...
  • Page 131 Change the icons specified for registered users. [Register Authentication In- Register or delete the biometric authentication information or IC card au- formation] thentication information of the current login user. [Cellular Phone/PDA Set- Configure settings to print data from a cellular phone or PDA. ting] bizhub 652/552...

  • Page 132: System Settings]

    Adjusts the criteria level of an original in color or black and white. [Power Save Settings] Refer to page 7-4. Appears when user access is permitted under [Administrator Settings]. [Output Settings] Refer to page 7-5. [AE Level Adjustment] Refer to page 7-9. bizhub 652/552...
  • Page 133 [AE Level Adjustment] Standard (2) [Auto Paper Select for [Prohibit Copy] Small Original] [Blank Page Print Settings] [Do Not Print] [Page Number Print Posi- [Left & Right Bind: All the Same Top & Bottom Bind: All the Same] tion] bizhub 652/552...
  • Page 134 [System Settings] Factory default [Select Keyboard] [Local Keyboard] Reference To enable Auto Paper: Press [Basic] ö [Paper] ö [Auto]. To configure Background Removal to Auto: Press [Basic] ö [Density/Background] ö [Auto]. bizhub 652/552...

  • Page 135: Custom Display Settings]

    [Job Display Setting] Configure whether to display a list of jobs in proc- ess and in queue or to display the progress of the current job in process, when the default display of the left panel set to [Job List]. bizhub 652/552...
  • Page 136 Key 2] (User Box Settings) [Copy Operating Screen] [No] [TX Display] [No] [RX Display] [No] [Color Selection Settings] [Green] [Left Panel Display Default] [Job List] [Job Display Setting] [List Display] [Uppercase and Lower- [Differentiate] case Letters] [Search Option Screen] [OFF] bizhub 652/552...

  • Page 137: Copier Settings]

    7-39. [Auto Zoom (ADF)] [Specify Default Tray when APS Off] [Select Tray for Insert Configure the default paper tray loaded with paper for the cover pages Sheet] (front cover), inserted sheets and the chapter title pages. bizhub 652/552...
  • Page 138 Fold & Staple] [Auto Zoom for Com- [Auto Display Zoom Ratio] bine/Booklet] [Auto Sort/Group Selec- [Yes] tion] [Default Copy Settings] [Factory Default] [When AMS Direction is In- [Print] correct] [Separate Scan Output [Page Print] Method] [Enlargement Rotation] [Allow] 6-10 bizhub 652/552...

  • Page 139: Scan/Fax Settings]

    This setting is for the network scan, fax, and network fax operations. For details, refer to the [User's Guide Network Scan/Fax/Network Fax Operations]. [Printer Settings] This setting is for the printer operations. For details, refer to the [User's Guide Print Operations]. bizhub 652/552 6-11...

  • Page 140: Change Password]

    When logged in as a registered user, you can change the E-mail address. Appears when user access is permitted under [Administrator Settings]. For details, refer to page 7-44. Press the Utility/Counter key ö [User Settings] ö [Change E-Mail Address]. Press [E-Mail Address]. Change the E-mail address. Press [OK]. 6-12 bizhub 652/552...

  • Page 141: Change Icon]

    [Change Icon] Change the icon specified as registered user information. When logged in as a registered user, you can change the icon. Press the Utility/Counter key ö [User Settings] ö [Change Icon]. Select the icon and press [OK]. bizhub 652/552 6-13...

  • Page 142: Register Authentication Information]

    Log in as a registered user. Press the Utility/Counter key ö [ User Settings ] ö [ Register Authentication Information]. Press [Edit]. % To delete authentication information, press [Delete]. For biometric authentication For IC card authentication Register authentication information. 6-14 bizhub 652/552...

  • Page 143: Cellular Phone/Pda Setting]

    For IC card authentication, place your IC card on the authentication unit, and press [OK]. Press [Close]. 6.10 [Cellular Phone/PDA Setting] Configure settings to print data in a cellular phone or PDA through this machine. For details, refer to the [Us- er's Guide Box Operations] or [User's Guide Print Operations]. bizhub 652/552 6-15...
  • Page 144 [Cellular Phone/PDA Setting] 6.10 6-16 bizhub 652/552...

  • Page 145: Administrator Settings]

    [Administrator Settings]...
  • Page 147 Configure settings to restrict the functions of this machine for processing secret data. [License Settings] Enable an optional i-Option function. [OpenAPI Authentication Configure settings to prevent our deprecated OpenAPI connection appli- Management Setting] cation from being registered in this machine. bizhub 652/552...

  • Page 148: System Settings]

    Configure the time to automatically turn this machine off. Factory default [Low Power Mode Set- 15 min. tings] [Sleep Mode Settings] 30 min. [Power Save Key] [Low Power] [Enter Power Save Mode] [Immediately] [Auto Power OFF Setting] [No] bizhub 652/552...

  • Page 149: Output Settings]

    [Output Tray Settings] • [Copy]: [Tray 2] • [Print]: [Tray 2] • [Print Reports]: [Tray 1] • [Fax]: [Tray 1] [Tray 3] is displayed if the Job Separator JS-603 is installed in the Finisher FS-527. [Shift Output Each Job] [Yes] bizhub 652/552...

  • Page 150: Date/Time Settings]

    Factory default [Time Zone] +00:00 Reference To cancel the current settings: Press the C (Clear) key. 7.1.4 [Daylight Saving Time] Configure daylight saving time settings. Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Daylight Saving Time]. bizhub 652/552...

  • Page 151: Weekly Timer Settings]

    • To make the user to enter the password, you need to specify the pass- word. Factory default [Weekly Timer ON/OFF [OFF] Settings] [Select Time for Power [No] Save] [Password for Non-Busi- [No] ness Hours] bizhub 652/552...

  • Page 152: Restrict User Access]

    This setting is for the network scan, fax, and net- ing] work fax operations. For details, refer to the [User's Guide Network Scan/Fax/Network Fax Operations]. Factory default [Changing Job Priority] [Allow] [Delete Other User Jobs] [Restrict] [Registering and Changing [Allow] Addresses] [Changing Zoom Ratio] [Allow] bizhub 652/552...

  • Page 153: Expert Adjustment]

    Adjust leading edge erase width. For details on displaying this item, contact your service representative. [Vertical Adjustment] Adjust the feed direction zoom ratio of paper types. For details on displaying this item, contact your service representative. [Media Adjustment] p. 7-14 bizhub 652/552...
  • Page 154 If a good result was not achieved after the [Image Stabilization Only] button was pressed, execute [Initialize + Im- age Stabilization]. [Paper Separation Adjust- Adjust the paper position where the two sides are separated for 2-sided ment] print. 7-10 bizhub 652/552...
  • Page 155 Specify to print a document compatible with PostScript specifications. For details on displaying this item, contact your service representative. [Yes] Disable density correction and print a document according to PostScript specifications. [No] Enable density correction. bizhub 652/552 7-11...
  • Page 156 Image Stabilization [Paper Separation Adjust- 0.0 mm ment] [Prior Detection Setting] [Yes] [Warning Display]: [TYPE1] [Detection level]: [Std.] [Detection While Feeding [Remove] Setting] [Non-Image Area Erase [Erase Operation]: [Specify] Operation Settings] [Erase Method]: [Rectangular] [Original Density]: [1] 7-12 bizhub 652/552...

  • Page 157: [Leading Edge Adjustment]

    (b) is 1/8±1/32 inches (3.0 ± 0.5 mm). % Press [+] or [-] to adjust the width. Press the Start key to print a test pattern. Press [OK]. b:1/8 inches±1/32 inch (3.0 mm±0.5 mm) bizhub 652/552 7-13...

  • Page 158: [Media Adjustment]

    Press [+] or [-] to adjust the staple position while checking the sample. Press [OK]. Create a sample, and check the print result. Reference To adjust the half-fold position: Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Fin- isher Adjustment] ö [Half-Fold Position]. 7-14 bizhub 652/552...

  • Page 159: [Half-Fold Position]

    ö [Finisher Adjustment] ö [Tri-Fold Position Adjustment]. Select the paper size of which tri-fold position is adjusted. Press [+] or [-] to adjust the tri-fold position while checking the sample. Press [OK]. Create a sample, and check the print result. bizhub 652/552 7-15...

  • Page 160: [Punch Vertical Position Adjustment]

    % First, select the paper type if the Finisher FS-527 and Punch Kit PK-517 are installed. Press [+] or [-] to adjust the punched hole position while checking the sample. Press [OK]. Create a sample, and check the print result. 7-16 bizhub 652/552...

  • Page 161: [Punch Regist Loop Size Adjustment]

    ö [Finisher Adjustment] ö [Vertical Punch (Z-Fold) Position Adjustment]. Select the paper size to adjust the vertical punch position. Press [+] or [-] to adjust the punched hole position while checking the sample. Press [OK]. Create a sample, and check the print result. bizhub 652/552 7-17...

  • Page 162: [Horizontal Punch (Z-Fold) Position Adjustment]

    Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [1st Z-Fold Position Adjustment]. Press [+] or [-] to adjust the first folding position while checking the sample. Press [OK]. Create a sample, and check the print result. 7-18 bizhub 652/552...

  • Page 163: [2Nd Z-Fold Position Adjustment]

    Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Expert Adjustment] ö [Finisher Adjustment] ö [Punch Unit Size Detect Sensor]. Press the Start key. % The punch unit edge sensor is automatically adjusted. % The adjusted result appears. bizhub 652/552 7-19...

  • Page 164: [Gradation Adjustment]

    Place 10 or more sheets of blank paper on top of the test pattern to prevent it from becoming transpar- ent. Close the ADF. Press the Start key. The test pattern is scanned. The gradation level is automatically adjusted. Repeat steps 5 through 11 two more times. 7-20 bizhub 652/552...

  • Page 165: List/Counter]

    Every time the counter is changed, the count is reset to 0. [Counter Clear] Resets the count to 0. [Paper Size] Select the paper size of the counter. [Paper Type] Select the paper type of the counter. Factory default [Job Settings List] • [1-Sided] • Tray 1 bizhub 652/552 7-21...

  • Page 166: Reset Settings]

    ADF. [Next Job] Configure whether to reset the following settings when the next job is selected. • [Staple Setting] • [Original Set/Bind Direction] • [Reset Data After Job] The destination of data is always reset. 7-22 bizhub 652/552...

  • Page 167: User Box Settings]

    Specify whether to detect a size of 8-1/2 e 14 or a foolscap size. Detection] (Metricr area on- [Foolscap Size Setting] Select the size that you want to use when the paper size is close to 13 inch- bizhub 652/552 7-23...

  • Page 168: Stamp Settings]

    Change the selected header or footer. [Fax TX Settings] This setting is for the fax and network fax operations. For details, refer to the [User's Guide Network Scan/Fax/Network Fax Op- erations]. Factory default [Fax TX Settings] [Cancel] 7-24 bizhub 652/552...

  • Page 169: Blank Page Print Settings]

    Configure whether to skip a job in the fax mode. [Other than Fax] Configure whether to skip a job in a mode other than the fax mode. Factory default [Skip Job Operation Set- [Fax]: [Yes] tings] [Other than Fax]: [Yes] bizhub 652/552 7-25...

  • Page 170: Default Bypass Paper Type Setting]

    Select whether to print the page numbers on a same position on all pages or on positions symmetric with respect to the stapling position. Press the Utility/Counter key ö [Administrator Settings] ö [System Settings] ö [Page Number Print Position]. 7-26 bizhub 652/552...

  • Page 171: Advanced Preview Setting]

    [Left & Right Bind: All the Same Top & Bottom Bind: All the Same] tion] 7.1.17 [Advanced Preview Setting] Configure settings to fax or scan a document. For details, refer to the [User's Guide Network Scan/Fax/Net- work Fax Operations]. bizhub 652/552 7-27...

  • Page 172: Administrator/Machine Settings]

    The default abbreviation is input for the product name. If necessary, it can be changed freely. [One-Touch/User Box Registration] This setting is for the User Box, network scan, fax, and network fax operations. For details, refer to the [User's Guide Network Scan/Fax/Network Fax Operations] and [User's Guide Box Operations]. 7-28 bizhub 652/552...

  • Page 173: User Authentication/Account Track]

    Before registering a user, select an authentication method. If all management data is cleared after the authentication method was selected, the histories of the registered users, print, send, receive, and save jobs are deleted. Press the Utility/Counter key ö [Administrator Settings] ö [User Authentication/Account Track] ö [General Settings]. bizhub 652/552 7-29...
  • Page 174 [Ticket Hold Time Setting] Enter a time to hold the Kerberos authentication tickets. This item is avail- able when the external server authentication settings are configured and [Server Type] is set to [Active Directory]. 7-30 bizhub 652/552...

  • Page 175: User Authentication Settings]

    If only user authentication settings are configured, up to 1000 users can be registered. If user authen- tication and account track settings are configured, up to 500 users can be registered as initial settings. Press the Utility/Counter key ö [Administrator Settings] ö [User Authentication/Account Track] ö [User Authentication Settings]. bizhub 652/552 7-31...
  • Page 176 [Max. Allowance Set] Configure the max. allowance for the selected user or all users. When not specifying it, select [No Limit]. • [Total Allowance] Specify the number of copies that can be out- put by the user. 7-32 bizhub 652/552...
  • Page 177 [ON] (when the authentication unit is installed) [Public User]: [Print Immediately] [ID & Print Operation Set- [Print All Jobs] tings] [Default Operation Selec- [Begin Printing] tion] [Output Permission] [Send]: [Allow] [Max. Allowance Set] [Total Allowance]: [No Limit] bizhub 652/552 7-33...

  • Page 178: Account Track Settings]

    • Select an account to be deleted, and the press [Delete]. [Account Name] Specify the account name. • An account name that has already been regis- tered cannot be used again. [Password] Enter the password. 7-34 bizhub 652/552...

  • Page 179: Print Without Authentication]

    Press the Utility/Counter key ö [Administrator Settings] ö [User Authentication/Account Track] ö [General Settings] ö [Number of User Counters Assigned]. 7.4.4 [Print without Authentication] This setting is for the print operations. For details, refer to the [User's Guide Print Operations]. bizhub 652/552 7-35...

  • Page 180: Print Counter List]

    Configure the external server that performs user authentication. Press the Utility/Counter key ö [Administrator Settings] ö [User Authentication/Account Track] ö [External Server Settings]. Settings Select a number for the desired external server. You can also change the settings for the registered serv- ers. 7-36 bizhub 652/552...

  • Page 181: Limiting Access To Destinations]

    Specify how to log in to this machine. [IC Card Authentication] allows the user to log in by simply placing the IC card. [Card Authentica- tion + Password] allows the user to log in by placing the IC card and entering the pass- word. bizhub 652/552 7-37...

  • Page 182: User/Account Common Setting]

    Fax Operations] and [User's Guide Network Administrator]. 7.4.11 [Scan to Authorized Folder Settings] This setting is for the network scan, fax, and network fax operations. For details, refer to the [User's Guide Network Scan/Fax/Network Fax Operations] and [User's Guide Network Administrator]. 7-38 bizhub 652/552...

  • Page 183: Network Settings]

    [Auto Zoom (Platen)] [OFF] [Auto Zoom (ADF)] [ON] [Specify Default Tray when [Tray Before APS ON] APS Off] [Print Jobs During Copy [Accept] Operation] [Tri-Fold Print Side] [Inside] [Automatic Image Rotation] [When Auto Paper/Auto Zoom is set] bizhub 652/552 7-39...

  • Page 184: Printer Settings]

    This setting is for the print operations. For details, refer to the [User's Guide Print Operations]. [Fax Settings] This setting is for the fax and network fax operations. For details, refer to the [User's Guide Network Scan/Fax/Network Fax Operations]. 7-40 bizhub 652/552...

  • Page 185: System Connection]

    To authenticate, enter the login name and password in [Login Name] and [Password]. • When user authentication is performed or when acquiring the device information with the PageScope Authentica- tion Manager, set the Authentication setting of the OpenAPI Setting screen of the machine to [OFF]. bizhub 652/552 7-41...
  • Page 186 [Request Client Certificate] [Invalid] [Expiration Date] [Confirm] [Key Usage] [Do Not Confirm] [Chain] [Do Not Confirm] [Expiration Date Confirma- [Do Not Confirm] tion] [CN] [Do Not Confirm] [Authentication] [OFF] [Prefix/Suffix Automatic [OFF] Setting] [Cellular Phone/PDA Set- [Restrict] ting] 7-42 bizhub 652/552...

  • Page 187: Security Settings]

    Press the Utility/Counter key ö [Administrator Settings] ö [Security Settings] ö [Security Details] ö [Pass- word Rules]. 7.10.2 [User Box Administrator Setting] Configure settings for the User Box operations. For details, refer to the [User's Guide Box Operations]. bizhub 652/552 7-43...

  • Page 188: Administrator Security Levels]

    • [Blank Page Print Settings] • [Change E-Mail Address] • [Print Jobs During Copy Operation] [Prohibit] Does not allow the user to change the settings allowed in Level 1 and Level Factory default [Administrator Security [Prohibit] Levels] 7-44 bizhub 652/552...

  • Page 189: Security Details]

    Account password • User Box password • Security document password • Administrator Password • Encryption Passphrase • WebDAV server password • SNMP password (auth-password, priv-password) [Mode 1] Disables authentication operations for a specified time if authentication fails. bizhub 652/552 7-45...
  • Page 190 If [Password Copy] is selected in [Application], you can embed a pass- word on paper. You can also detect a password embedded on paper. • This item is displayed when the optional Security Kit SC-507 is in- stalled. 7-46 bizhub 652/552...

  • Page 191: Enhanced Security Mode]

    [Management Function Choice] These items must be configured by your service • [CE Password] representative. For details, contact your service • [CE Authentication] representative. • [HDD] All the settings above must be configured by your service representative. bizhub 652/552 7-47...

  • Page 192: Settings To Forcibly Changed

    [Network] / [E-mail Setting] / [S/MIME] in Page- [Automatically Obtain Certificates] is set to [OFF]. Scope Web Connection [E-Mail Text Encrypt. Method] is set to [3DES]. [Maintenance] / [Reset] / [Network Setting Clear] in [Network Setting Clear] is not displayed. PageScope Web Connection 7-48 bizhub 652/552...

  • Page 193: Hdd Settings]

    User Boxes • Using PageScope Scan Direct to retrieve documents in User Boxes • Box operations using PageScope Web Con- nection (The User Box tab does not appear.) Factory default [Network Function Usage [ON] Settings] bizhub 652/552 7-49...

  • Page 194: Stamp Settings]

    [Send]: [Do Not Apply] Reference To configure copy protect and stamp repeat settings: Press [Application] ö [Stamp/Composition]. 7.10.9 [Driver Password Encryption Setting] This setting is for the print operations. For details, refer to the [User's Guide Print Operations]. 7-50 bizhub 652/552...

  • Page 195: License Settings]

    LK-101, i-Option LK-102, i-Option LK-103, or i-Option LK-105 function is enabled. 7.12 [OpenAPI Authentication Management Setting] Configure settings to prevent our deprecated OpenAPI connection application from being registered in this machine. For details, contact your service representative. bizhub 652/552 7-51...
  • Page 196 [OpenAPI Authentication Management Setting] 7.12 7-52 bizhub 652/552...

  • Page 197: Maintenance

    Maintenance...

  • Page 199: Paper

    Paper with ribbons, hooks, buttons, etc., attached Paper storage Store paper in a cool, dark location with little humidity. If the paper becomes damp, a paper jam may occur. Store the paper flat, not on its edge. Curled paper may cause a paper jam. bizhub 652/552...

  • Page 200: Loading Paper

    % If special paper is loaded, the paper type must be specified. % Load letterhead paper so that the side to be printed on faces down. Close Tray 1. Reference To configure paper settings: Press [Basic] ö [Paper]. bizhub 652/552...

  • Page 201: Loading Paper Into Tray 3 And Tray 4

    % Do not load so many sheets of paper that the top of the stack is higher than the , mark. % If paper is curled, flatten it before loading it. % Push the Lateral Guide firmly up against the edges of the paper. % Load letterhead paper so that the side to be printed on faces up. bizhub 652/552...
  • Page 202 Load them in the w orientation, as shown in the illustration. A label sheet consists of the printing surface, sticking layer, and pasteboard. Peel off the pasteboard, then you can stick the label to other objects. Slide the Lateral Guide to fit the size of paper being loaded. bizhub 652/552...

  • Page 203: Loading Paper Into The Lct

    % If paper is curled, flatten it before loading it. % If special paper is loaded, the paper type must be specified. % Load letterhead paper so that the side to be printed on faces Reference To configure paper settings: Press [Basic] ö [Paper]. bizhub 652/552...

  • Page 204: Consumables

    When it is time to replace the Toner Cartridge or Drum Unit, an advanced warning message similar to the one shown below appears. Replace them according to the guidance contained in your maintenance agree- ment. For the Toner Cartridge, the machine stops operating after the message appears. Toner Cartridge bizhub 652/552...
  • Page 205 If a user continues to operate the machine while a warning message is displayed, the following replacement message appears. Replace the Toner Cartridge according to the guidance contained in your maintenance agreement. For Drum Unit, contact your service representative. Toner Cartridge Drum Unit bizhub 652/552...

  • Page 206: Checking Consumables Status

    % To print the counter list, press [Print List], select paper, and then press the Start key. % To display the Coverage Rate screen, press [Coverage Rate]. <Counter List> <Coverage Rate> <Meter Count> Item Description Black The cumulative total number of pages printed 8-10 bizhub 652/552...
  • Page 207 Even when data is saved in a user box, it is not counted unless it is printed. • Printed reports or lists are not counted. Total Duplex The total number of pages printed in 2-Sided mode • When printed in 2-Sided mode, two pages are counted as one print. bizhub 652/552 8-11...

  • Page 208: Checking The Total Number Of Pages Printed

    Open the ADF and then remove the slit scan glass cleaner. Wipe stains off the Slit Scan Glass using the slit scan glass clean- % Wipe off stains from the back side to the front side along the guide. 8-12 bizhub 652/552...

  • Page 209: Original Glass, Control Panel, Paper Take-Up Roller

    Wipe the surface using a soft, dry cloth. Housing, Original Pad NOTICE Never use solvents, such as benzene or thinner, to clean the Original Pad. Wipe the surface using a soft cloth moistened with a mild household detergent. bizhub 652/552 8-13...
  • Page 210 Cleaning procedure 8-14 bizhub 652/552...

  • Page 211: Troubleshooting

    Troubleshooting...

  • Page 213: When A Problem Is Detected (Call A Service Representative)

    Problems that cannot be corrected by the user Write down the malfunction code in the Service Call screen. Turn off the Sub Power Switch. Turn off the Main Power Switch. bizhub 652/552...

  • Page 214: Troubleshooting Table

    If a thin 2-sided original is being ied? copied, the print on the back side may be reproduced on the front side of the copy. In the Back- ground Removal screen, select a lighter background density. (p. 5-20) bizhub 652/552...
  • Page 215 Securely close the ADF. Is the original one that does not Check that the original is one meet the specifications? that can be loaded into the ADF. (p. 12-8) Is the original correctly loaded? Position the original correctly. (p. 3-5) bizhub 652/552...
  • Page 216 1 inch (25 mm)), a correct image will not be able to be ob- tained, and scanning may not finish. Try "stretching your fin- ger", "placing your finger deep- ly", or "placing your finger shallowly" on the scanning sec- tion. bizhub 652/552...
  • Page 217 Use the same USB port as the one used when installing the driver. bizhub 652/552...

  • Page 218: Main Messages And Their Remedies

    [The toner needs to be replaced. Toner is depleted. Replace the Toner Cartridge Follow the instructions to re- following the guidance contained place the toner cartridge and in your maintenance agreement. close the front door.] bizhub 652/552...
  • Page 219 Wait boards may be connected.] at least 10 seconds, and then turn on the main power of this machine. bizhub 652/552...

  • Page 220: Icons That Appear In The Touch-Panel Screen

    Indicates that a nonstandard external memory has been connected to this machine, therefore, USB connection is not enabled. Indicates that the job is in the waiting-for-redial status because, for exam- ple, the recipient's line is busy when sending with the G3 Fax or IP Address Fax function. 9-10 bizhub 652/552...

  • Page 221: If Print Quality Is Deteriorated

    If the Printhead becomes dirty, print quality may be reduced. If this occurs, clean the Printhead according to the following procedure. Pull out Tray 1. Remove the Print Head glass cleaning tool from Tray 1. Open the machine'sLower Front Door. Release the Waste Toner Box Lock Lever, and then remove theWaste Toner Box. bizhub 652/552 9-11...
  • Page 222 Insert thePrint Head Glass Cleaning Tool into the print head cleaning opening, pull it out, and then repeat this back-and-forth movement two or three times. Install theWaste Toner Box. Place back the Print Head Glass Cleaning Tool to Tray 1. Close Tray 1. 9-12 bizhub 652/552...

  • Page 223: Authentication Unit (Biometric Type)

    Authentication unit (Biometric type)

  • Page 225: Using An Authentication Unit (Biometric Type)

    The status indicator LED and notice sound indicate the status of the authentication unit. Status indicator LEDs Status Lit in green Ready state or authentication is completed Flash in green During authentication or scanning operation Lit in red Authentication failed or scanning failed Unlit The authentication unit is not recognized bizhub 652/552 10-3...

  • Page 226: Configuring This Machine

    Synchronize User Authentication & Account Track to [Synchronize]. Use the Control Panel of this machine to display the Administrator Settings screen. Press [User Au- thentication/Account Track], then [General Settings]. Set [User Authentication] to [ON (MFP)], and then press [OK]. Press [Yes], and then [OK]. 10-4 bizhub 652/552...
  • Page 227 For details on how to log in to this machine, refer to page 10-18. Press [OK] twice. Press [Logoff Settings]. Specify whether to log out the user when scanning the original has finished after the user logged in with the authentication unit. Press [OK]. Press [Close] twice. bizhub 652/552 10-5...

  • Page 228: Registering A User

    Track], and then [User Authentication Settings]. NOTICE [User Authentication Settings] is disabled when User Authentication is set to [OFF] in General Settings. Press [User Registration]. Select a desired registration number, and then press [Edit]. Press [Register Auth. Info.]. 10-6 bizhub 652/552...

  • Page 229: Registering A User Using Data Administrator

    (USB-Driver) of the authentication unit, and then install Data Administrator Bio Plugin. NOTICE Before setup, install Data Administrator V4.0 or later in your computer. For the Data Administrator operat- ing environment and installation procedure, refer to the Data Administrator User's Guide. bizhub 652/552 10-7...

  • Page 230: Checking The Version Of The Installed Data Administrator

    Connect the authentication unit to the USB port of your computer. The [Found New Hardware] dialog box appears. Select [Locate and install driver software (recommended)]. Insert the application DVD-ROM provided with the authentication unit into the DVD-ROM drive of the computer. 10-8 bizhub 652/552...
  • Page 231 Check that the driver's search location is the application DVD-ROM, and then click [Next]. % When the driver's search location is not the application DVD-ROM, click [Browse]. Select the Bio- Driver (USB-Driver) folder on the DVD-ROM, and then click [OK]. bizhub 652/552 10-9...
  • Page 232 Install Data Administrator Bio Plugin. Open the DA_Bio_Plugin folder on the application DVD-ROM, and then click setup.exe. Select a language, and then click [OK]. The installation program starts. Follow the on-screen instructions to proceed with the installation. 10-10 bizhub 652/552...
  • Page 233 10.1 Using an authentication unit (biometric type) Click [Next]. Select [I accept the terms in the license agreement], and then click [Next]. Click [Install]. bizhub 652/552 10-11...

  • Page 234: User Registration

    USB power supply, resulting in an operation failure. To use the USB hub, be sure to connect the self-power USB hub that supplies 500 mA or more. Restart the procedure 5 or more seconds after connecting the authentication unit. 10-12 bizhub 652/552...
  • Page 235 Data Administrator starts, and device information of this machine is imported. The Device Information window appears. % For details on how to import device information, refer to the Data Administrator User's Guide. In Select Function, select [Authentication Settings] - [User Setting], and then click [Add]. bizhub 652/552 10-13...
  • Page 236 Select the desired template, and then click [OK]. The User Registration window appears. Enter the user name and password, select the [AU-101] or [AU-102] tab, and then click [Register Au- thentication Information]. % Enter the E-mail address and other information as required. 10-14 bizhub 652/552...
  • Page 237 % If the authentication test has failed, place your finger on the authentication unit again, and click [Au- thentication Test]. % If the authentication has failed, click [Reset] to repeat the scanning process. For Authentication Unit AU-101 For Authentication Unit AU-102 Click [Registration]. bizhub 652/552 10-15...
  • Page 238 % Select the user name and click [Edit] to change the registered data. Click [Write]. % Data Administrator provides the batch copy function that batch-configures the registered user data in multiple machines with the authentication unit enabled. The registered user data is configured in this machine. 10-16 bizhub 652/552...
  • Page 239 10 or more seconds has elapsed. Not doing so may result in an operation failure. When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be dam- aged or a failure may occur. bizhub 652/552 10-17...

  • Page 240: Logging In To This Machine

    Press [ID & PW] to [Login] by entering the [User Name] and the [Password], without using the authenti- cation unit. When [1-to-many authentication] has been specified Place your finger on the authentication unit. Authentication Unit (biometric type) AU-101 Authentication Unit (biometric type) AU-102 The basic settings screen appears. 10-18 bizhub 652/552...

  • Page 241: When [1-To-1 Authentication] Has Been Specified

    Using an authentication unit (biometric type) When [1-to-1 authentication] has been specified Select [User Name], and enter the user name. Place your finger on the Authentication Unit. Authentication Unit (biometric type) AU-101 Authentication Unit (biometric type) AU-102 The basic settings screen appears. bizhub 652/552 10-19...
  • Page 242 Using an authentication unit (biometric type) 10.1 10-20 bizhub 652/552...

  • Page 243: Authentication Unit (Ic Card Type)

    Authentication unit (IC card type)

  • Page 245: Using Authentication Unit (Ic Card Type)

    7-29. To combine account track settings with user authentication settings, set Synchro- nize User Authentication & Account Track to [Synchronize]. Use the Control Panel of this machine to display the Administrator Settings screen. Press [User Au- thentication/Account Track], then [General Settings]. bizhub 652/552 11-3...
  • Page 246 [Card Authentication]: Allows the user to log in by simply placing the IC card. [Card Authentication + Password]: Allows the user to log in by placing the IC card and entering the password. For details on how to log in to this machine, refer to page 11-16. 11-4 bizhub 652/552...

  • Page 247: Registering A User

    Registering a user using the Control Panel of this machine Use the Control Panel of this machine to display the Administrator Settings screen. Press [User Au- thentication/Account Track], and then [User Authentication Settings]. Press [User Registration]. Select a desired registration number, and then press [Edit]. bizhub 652/552 11-5...
  • Page 248 Press [Edit]. Place the IC card on the authentication unit, and press [OK]. When message [Registration complete.] appears, press [Close] twice. Enter the user name and password. Configure function permission settings as required. Press [OK]. Press [Close]. 11-6 bizhub 652/552...

  • Page 249: Registering A User Using Data Administrator

    If Data Administrator V3.x is installed, it is removed when V4.x is installed. Click [Plug-in version]. In [Plug-in information list], confirm the plugin version of Data Administrator. % This software is available if the plugin version is "4.x". bizhub 652/552 11-7...

  • Page 250: Setup

    The [Found New Hardware] dialog box appears. Select [Locate and install driver software (recommended)]. Insert the application DVD-ROM provided with the authentication unit into the DVD-ROM drive of the computer. Click the [Browse my computer for driver software (advanced)]. 11-8 bizhub 652/552...
  • Page 251 Check that the driver's search location is the application DVD-ROM, and then click [Next]. % When the driver's search location is not the application DVD-ROM, click [Browse]. Select the IC Card Driver (USB-Driver) folder in the DVD-ROM, and click [OK]. % Installation starts. bizhub 652/552 11-9...
  • Page 252 Install Data Administrator IC Card Plugin. Open the IC_Card_Plugin folder on the application DVD-ROM, and then click setup.exe. Select a language, and then click [OK]. The installation program starts. Follow the on-screen instructions to proceed with the installation. Click [Next]. 11-10 bizhub 652/552...
  • Page 253 Using authentication unit (IC card type) Select [I accept the terms in the license agreement], and then click [Next]. Click [Install]. Click [Finish]. Installation of the Data Administrator IC Card Plugin is completed, which completes the setup. bizhub 652/552 11-11...

  • Page 254: User Registration

    Restart the procedure 5 or more seconds after connecting the authentication unit. Data Administrator starts, and device information of this machine is imported. The Device Information window appears. % For details on how to import device information, refer to the Data Administrator User's Guide. 11-12 bizhub 652/552...
  • Page 255 11.1 Using authentication unit (IC card type) In Select Function, select [Authentication Settings] - [User Setting], and then click [Add]. Select the desired template, and then click [OK]. The User Registration window appears. bizhub 652/552 11-13...
  • Page 256 % Enter the E-mail address and other information as required. Place the IC card on the authentication unit, and click [Start reading]. % If necessary, click [Card ID Input] to register the card ID. Click [OK]. % Repeat steps 5 to 9 to register all users. 11-14 bizhub 652/552...
  • Page 257 % Data Administrator provides the batch copy function that batch-configures the registered user data in multiple machines with the authentication unit enabled. The registered user data is configured in this machine. Click [OK]. Disconnect the authentication unit from the USB port of the computer. bizhub 652/552 11-15...

  • Page 258: Logging In To This Machine

    Press [ID & PW] to [Login] by entering the [User Name] and the [Password], without using the authenti- cation unit. When [Card Authentication] is enabled Place the IC card on the Working Table WT-506. The basic settings screen appears. 11-16 bizhub 652/552...

  • Page 259: When [Card Authentication + Password] Is Enabled

    Using authentication unit (IC card type) When [Card Authentication + Password] is enabled Place the IC card on the Working Table WT-506. Press [Password], and enter the password. Press [Login] or the Access key. The basic settings screen appears. bizhub 652/552 11-17...
  • Page 260 Using authentication unit (IC card type) 11.1 11-18 bizhub 652/552...

  • Page 261: Specifications

    Specifications...

  • Page 263: Paper

    Bypass Tray: 20 sheets Postcards Bypass Tray: 50 sheets Tray 3: 200 sheets , Tray 4: 200 sheets This item must be configured by your service rep- resentative. Envelope Bypass Tray: 10 sheets Label sheets Bypass Tray: 50 sheets bizhub 652/552 12-3...
  • Page 264 When you select Plain Paper, Thick 1, Thick 1+, Thick 2, Thick 3, or Thick 4 for the Bypass Tray, you can select Duplex 2nd Side. Select Duplex 2nd Side when you load paper where something is printed on one side. 12-4 bizhub 652/552...

  • Page 265: Machine Specifications

    12.2 Machine specifications 12.2 Machine specifications bizhub 652/552 Specifications Type Scanner, printer, desktop, or stand-alone Document holder Stationary (mirror scanning) Photo conductor Light source White rare-gas fluorescent Copy system Laser electrostatic copying Developing system Dry 2-component HMT developing system Fusing system...
  • Page 266 Sub Power Switch was turned on to get ready for printing (room temper- ature: 73.4 °F (23 °C)) bizhub 652: 30 sec. or less bizhub 552: 30 sec. or less Period from the time Main Power Switch was turned on to the time this machine is ready for printing (room temperature: 73.4 °F (23 °C))

  • Page 267: Bizhub 652/552

    Background density Manual or automatic density adjustment (9 levels) Power supply bizhub 652/bizhub 552: AC 120 V, 16 A, 60 Hz (AC 220 V to 240 V, 10 A, 50/60 Hz) Max. power consumption bizhub 652: 2,100 W or less...

  • Page 268: Reverse Automatic Document Feeder

    Supply from machine Max. power consumption 60 W or less Size Width 24-5/16 inches e Depth 22-5/8 inches e Height 5-1/8 inches (Width 618 mm e Depth 575 mm e Height 130 mm) Weight Approx. 35-1/1/4 lb (Approx. 16kg) 12-8 bizhub 652/552...

  • Page 269: Options

    Staple: Plain paper (15-15/16 lb to 23-15/16 lb (60 g/m to 90 g/m Thick (24-3/16 lb to 55-5/8 lb (91 to 209 g/m Can be used only as a cover page. bizhub 652/552 12-9...
  • Page 270 61 to 100 10 copies sheets Paper loading quality 100 sheets <Output Tray 1> Maximum number of sta- 100 sheets pled sheets Plain paper (15-15/16 lb to 23-15/16 lb (60 g/m to 90 Shift amount 1-3/16 inches (30 mm) 12-10 bizhub 652/552...

  • Page 271: Saddle Stitcher Sd-508

    Plain paper (21-1/4 lb (80 Three sheets stapled 15 sets and folded Four sheets stapled 12 sets Five sheets stapled 8 sets Six to 15 sheets sta- 5 sets pled 16 to 20 sheets sta- 5 sets pled Tri-Fold bizhub 652/552 12-11...

  • Page 272: Punch Kit Pk-516

    There are five types of foolscap: 8-1/2 e 13-1/2 w, 8-1/2 e 13 w, 8-1/4 e 13 w, 8-1/8 e 13-1/4 w, 8 e 13 w. Any one of these sizes is selectable. For details, contact your service representative. 12-12 bizhub 652/552...

  • Page 273: Z-Folding Unit Zu-606

    200 sheets for each tray Power supply Supplied from Finisher. Size Width 20-1/8 inches e Depth 25 inches e Height 8-11/16 inches (Width 511 mm e Depth 635 mm e Height 220 mm) Weight Approx. 23-1/8 lb (Approx. 10.5 kg) bizhub 652/552 12-13...

  • Page 274: Finisher Fs-527

    31 to 40 sheets: 25 copies 41 to 50 sheets: 20 copies Paper loading height: 14-3/4 inches (375 mm) (8-1/2 e 11 w, A4 w or less)/7-3/8 inches (187.5 mm) (8-1/2 e 14 w, B4 w or more) 12-14 bizhub 652/552...

  • Page 275: Saddle Stitcher Sd-509

    (Width 239 mm e Depth 579 mm e Height 534 mm) Weight Approx. 52-15/16 lb (Approx. 24 kg) Consumables Staple SK-602 For EH-280 (Product No. 505 manufactured by MAX) (5000 staples includ- ed) e 2 unit Power supply Supplied from Finisher FS-527. bizhub 652/552 12-15...

  • Page 276: Punch Kit Pk-517

    50 °F to 95 °F (10 °C to 35 °C) operation) Humidity 10% to 80% (No dew condensation) System conditions (during Ambient temperature 14 °F to 140 °F (-10 °C to 60 °C) non-operation) Humidity 10% to 80% (No dew condensation) 12-16 bizhub 652/552...

  • Page 277: Authentication Unit (Biometric Type) Au-102

    800 e 600 pixels, 16-bit color or more Network TCP/IP Application Microsoft Internet Explorer 6.0 (SP1) or later Microsoft .NET Framework (SP1) or later Interface USB 1.1 or later Supported Operating Systems Windows XP Professional Edition (SP2) Windows Vista Business/Enterprise bizhub 652/552 12-17...

  • Page 278: Authentication Unit (Ic Card Type) Au-201

    800 e 600 pixels, 16-bit color or more Network TCP/IP Application Microsoft Internet Explorer 6.0 (SP1) or later Microsoft .NET Framework (SP1) or later Interface USB 1.1 or later Supported Operating Systems Windows XP Professional Edition (SP2) Windows Vista Business/Enterprise 12-18 bizhub 652/552...

  • Page 279: Appendix

    Appendix...

  • Page 281: Glossary

    Reverse Automatic Document Feeder. [Neg./Pos. Re- Function that copies the original with the light- and dark-colored areas or the verse] colors (gradations) of the image reversed. [Offset] Function that sorts copies. bizhub 652/552 13-3...
  • Page 282 This prevents copy errors from occurring in a large number of copies. Sort Function that prints a document in sets of copies. The second copy set is printed after all of the first copy set is finished. 13-4 bizhub 652/552...

  • Page 283: Index

    Index...

  • Page 285: Index By Item

    Enhanced security mode 7-47 Booklet 5-39 Enlarge display 4-15 Booklet original 5-36 Erasing 5-41 Brightness adjustment dial 2-10 Erasing frames 5-41 Bypass tray 2-6 Erasing non-image areas 5-41 Bypass tray door 2-6 Expert adjustment 7-9 External server settings 7-36 bizhub 652/552 14-3...
  • Page 286 Job Separator 12-16 Options 12-9 Job separator 2-3 12-12 Original glass 2-9 8-12 8-13 Job separator cover 2-16 Original output tray 2-6 Job separator JS-602 2-16 Original pad 8-13 Job separator JS-603 2-19 Original scales 2-9 Original setting 5-18 14-4 bizhub 652/552...
  • Page 287 Registering one-touch destinations or user boxes Total counter 2-6 7-28 Touch panel 2-10 2-12 Release lever 2-22 Tray 1 2-6 Replacement message 8-8 Tray 2 2-6 Replenishment message 8-3 Tray 3 2-6 Reset 4-5 Tray 4 2-6 Reset settings 7-22 bizhub 652/552 14-5...
  • Page 288 User box settings 7-23 User settings 6-3 Utility/counter 4-7 Waste toner box 2-9 Watermark 5-53 Weekly timer setting 7-7 Wide paper 5-7 Working table 2-3 Z folding unit 2-3 2-17 Z-folded original 5-20 Z-folding unit 12-13 Zoom 5-8 14-6 bizhub 652/552...

  • Page 289: Index By Button

    Copy Insert 5-29 Back (Blank) 5-24 Copy Program Lock Settings 7-8 Back (Copy) 5-24 Copy Protect 5-47 Background Removal 5-5 Copy Screen 6-7 Background Removal Level 5-5 Counter Details 7-33 7-35 Banner Printing 4-7 Cover Sheet 5-24 5-40 bizhub 652/552 14-7...
  • Page 290 Insert Paper 5-25 Fax Settings 7-40 Insert Sheet 5-25 Fax TX Settings 7-24 Insert Sheet Setting 5-45 Fax/Scan 4-6 Install License 7-51 Fax/Scan Settings 6-11 Interleave Paper 5-23 Finished Jobs 5-61 Interrupt 4-5 Finisher Adjustment 7-10 Finishing 5-12 14-8 bizhub 652/552...
  • Page 291 Print/Fax Output Settings 7-5 Non-Image Area Erase 5-41 Printer Adjustment 7-9 Non-Image Area Erase Operation Settings 7-11 Printer Information 7-42 Number of User Counters Assigned 7-30 Printer Settings 6-11 7-40 Prior Detection Setting 7-11 Program Jobs 5-29 bizhub 652/552 14-9...
  • Page 292 Security Settings 7-43 Tray 4 5-6 Select Keyboard 6-5 Tri-Fold Position Adjustment 7-15 Select Time for Power Save 7-7 Tri-Fold Print Side 6-10 7-39 Select Tray for Insert Sheet 6-9 TX Display 6-8 Send 5-60 Separate Scan 5-16 14-10 bizhub 652/552...
  • Page 293 Weekly Timer ON/OFF Settings 7-7 Weekly Timer Settings 7-7 When # of Jobs Reach Maximum 7-30 When AMS Direction is Incorrect 6-9 Wide Paper 5-7 With Margin 5-35 Without Margin 5-35 X/Y 5-7 Z-Folded Original 5-18 Zoom 4-19 5-57 bizhub 652/552 14-11...
  • Page 294 Index by button 14.2 14-12 bizhub 652/552...

This manual is also suitable for:

Bizhub 552

Table of Contents