How To Check The Running Mat For Proper Lubrication; Belt Adjustment - LifeSpan Power User Manual

3. Periodically lubricate the front and rear rollers to keep them at there peak
performance. If the treadmill belt/deck/roller is kept reasonably clean it is
possible to expect over 1200 hours before additional re-lubing is necessary.

6.5 How to check the running mat for proper lubrication:

1. Disconnect the main power supply.
2. Fold the treadmill up into the storage position.
3. Feel the back surface of the running mat.
If the surface is slick when touched, then no further lubrication is needed.
If the surface is dry to the touch, apply a suitable silicone lubricant.
We recommend you use a silicone based spray to lubricate your
Lifespan Treadmill. This can be purchased from your local sports
Retailer or a local hardware store.

6.6 Belt Adjustment

Belt Tension Adjustment-It is very important for joggers and runners in order to
provide a smooth, steady running surface. Adjustment must be made from the
right and left rear roller in order to adjust tension with the Hexagonal Wrench
provided in the parts package. The adjustment bolt is located at the end of the
rails as noted in diagram below:
Left bolt
Please Note: Adjustment is thru the small hold on the end caps.
Tighten the rear roller only enough to prevent slippage at the front roller. Turn
both the right and left bolt clockwise reasonably and inspect for proper tension.
- 11 -
Right bolt