LifeSpan Power User Manual page 7

the figures will be kept to "0" except for speed. Then manual model comes.
（9）"safety key"
Under urgent condition, pull this key, machine stops immediately.
（10）"speed down"
Under running condition, press this key, speed can be speeded down to the
one you need.
（11）"speed up"
Under running condition, press this key, speed can be speeded up to the
one you
need.
（12） "profile"
Under ready condition, press this key to enter own programs mode, you
have 3 own programs, C1~C3, please set your programs at first.
Select the program at first, then press "
Press "speed up" and "speed down" key to select the speed you want, from
1~16km/h, then press "profile" to set the speed of next minute. After set all
the speeds for 16minutes, you may press "start/stop" key to run your
program.
（13） "music"
Press this key to open or shut the speaker amplify.
（14）"Mode"
Under ready condition, press this key to choose running program. There is
P1-P99, 99 programs in total.
（15） LCD window
a. "incline": It shows auto incline (range: 0-20 Levels)
b. "distance": It shows the distance (range: 0 km-9.99km)
c. "time": It shows time（range:00:00 -99:99）
d. "speed": It shows speed (range: 1km/h-20km/h）
e. "cal/pulse": It shows the pulse when it has, if without pulse, it shows
calorie (range: 0-999 calorie）
:
f. It will be displayed when MP3 function is in use.
5.2 Unload operating
a. Insert power plug into the socket with earth wire, turn the switch to "1"
position which is on the frame
b. Put the safe key in the right position, then circuit is on, press "on/off", keep it
" key to edit it.
clear/set
- 6 -