LifeSpan Power User Manual page 8

run in unload condition. Test the condition of running belt (testing from low
speed to high ones), after testing, press "on/off".
c. If everything is ok, then start to run.
5.3 Meter operating instruction
5.3.1
a. Insert power plug into the socket with earth wire, turn the switch to "1"
position which is on the frame. Place the safety key to the appointed position.
After a few seconds, panel will show that the machine is ready.
b. Nip another end of safe key to your clothes, and stand on the footplate on both
sides.
c. Press"on/off" key, running belt moves at the lowest speed (1.0km/h). Speed
windows will display your running speed.
d. Start to run.
e. Press speed key or incline key to adjust speed and incline, speed window and
incline window will display your speed and incline .
f. To end your exercise in a safe way, please first press "on/off" key to close the
treadmill. Please do not leave the running belt until it stops slowly. Turn off the
power.
5.3.2 Heart Rate Testing
Our treadmill can test your heart rate via the heart rate sensor. The data is only
for reference.
5.4 Folding and Opening Treadmill
5.4.1 Folding
Firstly lift and fold the back part of the frame board by hand till you hear a light
sound, which means the folding system has been locked. At this time running
board can't be turned to the opposite direction
5.4.2 Opening
Put the folded treadmill in a capacious position when you want do exercise. Then
pull the adjusting parts by hand to keep it unlocked. Press the back part by your
hands down to about 10%, release it, then it will open automatically.
- 7 -