Maintaining Your Spa; Draining The Water - Emerald Spa Lite Leader Owner's Manual

46
Emerald Whirlpool Spa Owner's Manual

Draining the Water

Note:
Chemically treated water
may damage plants.
Place the garden hose
in a safe discharge area.
Note:
Some water will be left in the
bottom of the spa and in your
plumbing lines. This small
amount of water can be mixed
with fresh water without conse-
quence. If 100% draining is
required, a small submersible
pump or a wet/dry shop vac
should be used. If winterizing
your spa please turn to
page 47 for complete
instructions.

MAINTAINING YOUR SPA

Draining the Water
Cleaning the Spa Shell
Cleaning the Filter
Space Saver II Filtration System
Relamping the Underwater Light
Standby Mode
Winterizing Your Spa
The Spa Cabinet
Caution:
Do not allow the pump to run without water. Running the pump without water will cause pump
damage and void the warranty.
To drain your spa without taking access panel off:
1. Unscrew the cap and attach a garden hose.
2. Turn the black nozzle (the part just behind where the cap screws on) counter-clockwise and pull out to
drain the water from your spa.
3. When finished draining detach the garden hose, screw the cap back on and then push in and turn
clockwise (the part just behind where the cap screws on).