Emerald Spa Lite Leader Owner's Manual page 22

Spa Side Control
Panel SS-1D
[continued]
Setting the Filter Cycles - SS-1D ONLY
The filter cycle duration is programmable via the topside panel. Press the
"F3" will be displayed on the panel. "F3" is the default filter time and indicates a 3 hour cycle. Press the
pad again to cycle through the rest of the filter time options; "F6" = 6 hours, "F9 = 9 hours, and "FC" = 12
hours. After you have selected your duration, press the
Center Display Messages
These are some of the messages you may see on the center display.
Overheat
(Spa is deactivated)
The spa has shut down. DO NOT ENTER THE WATER! Turn off all power to the spa and call
your dealer or service organization. To reset the spa, press any panel button.
Flow
A pressure switch is not working. Call your dealer or service organization.
Sensor
The high-limit sensor or water temperature sensor is not working. Call your dealer or service
organization.
Features and Controls
pad, then the
pad again to exit the programming.
21
pad, and