Table of Contents
Advertisement
Install Filter
Elements
Note:
The Filter Key allows
the loosening/tightening
of the filter caps for filter/
spa maintenance. The
filter key's two parallel
pegs are inserted into the
filter cap and turned to
the desired open/closed
operation. The removal
hook aids in lifting the
elements from the interior
of the filter.
Starting And Using Your Spa
Install Filter Elements
Proper Water Level
Bleeding Air
Testing the GFCI
One-Pump Priming
Two-Pump Priming
Setting the Thermostat
Placing elements in the Filter
1.
Unpackage the filter elements located inside the
cabinet to be inserted into the filter.
2.
Unscrew the top of the filter canister located on
the top of the coping and insert the element with the
largest hole into the appropriate filter housing.
3.
Insert the element with the smaller hole into the filter
housing that accepts it.
4.
Insert the Filtering Assist Plug into the middle
of the filter element with the smallest hole.
(This procedure allows for water to penetrate
into the interior pleats of the element allowing
for optimal filtration.)
37
Starting and Using Your Spa
Hide quick links:
Advertisement
Table of Contents
