Emerald Spa Lite Leader Owner's Manual page 13

12
Emerald Whirlpool Spa Owner's Manual
7. Attach power wires to the terminal block. See 240V wiring diagram inside the control enclosure
cover. Attach the wires as follows:
8. Complete the conductor connections at the power supply panel.
9. Do not turn power on until instructed to do so in the "Starting and Using Your Spa" section.
Note:
Consult the Wiring Diagram on Page 53 for 240 Volt to 120 Volt conversion on
the Lite Leader System Only.
- White wire to terminal #2
- Black wire to terminal #3
- Red wire to terminal #4
- Green wire to terminal #5
240-Volt Power Input