Setting The Thermostat - Emerald Spa Lite Leader Owner's Manual

Setting the Thermostat

WARNING:
Never use the spa at temperatures above 104
Temperatures above 104 o F or prolonged immersion may cause hyperthermia. [See "Important Safety
Instructions" in the first section of this manual for a description of the symptoms and effects of hyperther-
mia.]
For Spas with a Lite Leader, SS-1D or SS-3D Power System: Press the thermostat button ("set" button for
SS-3D) to display the temperature previously set. Pressing the pad a second time will cause the set
temperature to increase or decrease depending on what direction was last chosen. Each successive press
will change the set temperature in the same direction. If the opposite direction is desired, release the pad
and let the display revert to the actual water temperature again. Press the pad to display the set tempera-
ture, and again to make the temperature change in the desired direction.
For Spas with a DS-2 or DS-4 Power System: Press the "Warm or Cool" temperature key pad until the
digital readout indicates a thermostat set point of 95
Note:
The hot setting on the thermostat will produce a temperature of approximately 104
your spa at 95 o F and cautiously increase the temperature over a few day period as you become accustomed
to its effect.
o F.
o F.
41
Starting and Using Your Spa
o F. Initially, operate