Emerald Spa Lite Leader Owner's Manual page 35

34
Emerald Whirlpool Spa Owner's Manual
Waterfall Jet
Cygnus Only
Tsunami Jet
Cygnus Only
Individual
Neck Jet Control
Cygnus Only
Drain
Therapy Jets, Control and Drain
A standard feature on all Cygnus spas, the waterfall jet is located
above the waterline. Utilizing the valve installed on the interior
side wall of the spa, you can control the intensity of the water
stream. Use for ambiance, relaxation or therapy for the neck and
shoulders.
A standard feature on all Cygnus spas, the Tsunami jet is located
just above the footwell. This jet works in coordination with the 3-
way Turbo jet (see previous page). By turning the turbo jet to the
9 o'clock position with both punps running a large degree of water
is forced into the Tsunami allowing a high volume of water to
appear. Jet action is further enhanced by the Tsunami's own air
control located on the top coping of the spa.
Installed on all Cygnus models is a separate valve controlling the
intensity of the water pressure for the neck jets. Pressure is con-
trolled by turning the face of the jet and/or by the use of this
control valve (location on the side of the arm rest).
The new spigot found on all models near the base of the cabinet
is for the use of draining your spa. To operate:
1. Unscrew the cap and attach a garden hose.
2. Turn the black nozzle (the part just behind where the cap
screws on) counter-clockwise and pull out to drain the water
from your spa.
3. When finished draining detach the garden hose, screw the cap
back on and then push in and turn clockwise (the part just
behind where the cap screws on).