Emerald Spa Lite Leader Owner's Manual page 20

Spa Side Control
Lite Leader
[continued]
Preset Filter Cycles
Your Lite Leader will automatically filter itself twice each day. The first filter cycle will begin 1 minute after
the Lite Leader is energized. The second filter cycle will begin 12 hours after the start of the first filter cycle.
The filter cycle is set by the dealer for 2 or 5 hours. The low-speed pump and ozone generator (if installed)
will run during filter cycles.
Center Display Messages
These are some of the messages you may see on the center display.
Overheat
(Spa is deactivated)
The spa has shut down. DO NOT ENTER THE WATER! Turn off all power to the spa and call
your dealer or service organization. To reset the spa, press any panel button.
Flow
A pressure switch is not working. Call your dealer or service organization.
Sensor
The high-limit sensor or water temperature sensor is not working. Call your dealer or service
organization.
19
Features and Controls