Safety Warnings And Guidelines; General Precautions; Ac /Power Precautions - Christie M Series Setup Manual

Table 1.3 M Series Projectors
MODEL NAME
Roadster WU12K-M
WX10K-M
WX7K-M
1.2

Safety Warnings and Guidelines

1.2.1 General Precautions

1.2.2 AC /Power Precautions

M Series Setup Guide
020-100011-05 Rev. 1 (07-2012)
PART NUMBER
118-025108-XX
118-017109-XX
118-018100-XX
FIRE HAZARD. Keep hands, clothes and all combustible material away from
the concentrated light beam of the projector. Position all cables where they
cannot contact hot surfaces or be pulled or tripped over.
All installation and maintenance procedures must be performed by a Christie
accredited service technician.
Projector must be operated in an environment that meets operating
specifications, as listed in
Use only the AC power cord supplied. Do not attempt operation if the AC
supply and cord are not within the specified voltage and power range. Refer
to the license label on the back of the projector or
rated voltage and power.
The projector is equipped with a 3-wire plug with a grounding pin. This is a
safety feature. If you are unable to insert the plug into the outlet, contact an
electrician to have the outlet replaced. NEVER defeat the safety purpose of
the grounding-type plug.
Do not allow anything to rest on the power cord. Locate the power cord
where persons walking on it or objects rolling over it cannot damage the
cord.
Do NOT look into the lens
Section 6 Specifications.
Section 1: Introduction
Section 6 Specifications
for
1-3