Christie M Series Setup Manual page 30

Section 3: Operation
Within A Presentation: Press F
enable a specific color or colors in the display. For example,
will display only red, and
Eliminating one or more colors can help with certain diagnostics and setups,
such as when accurately overlaying one image on top of another from
stacked projectors.
NOTE: Color enabling can also be implemented from numerous locations
within the menu system.
Press F followed by H
UNC
Brightness Uniformity settings. This will disable the features without
changing the settings associated with them.
Projector
Press P to access a specific projector within a group of projectors or to confirm if the local projector is
ROJ
listening. The number in the "Enter Number" window indicates which projector is currently listening to
commands, and will match the projector number that has been defined in the Menu Preferences menu.
The P check box (read-only) shows whether or not the projector physically connected to a keypad is
ROJ
listening to commands from that keypad. A check mark means that connected projector is listening; if there is
no check mark, you are communicating with a different projector.
To control a specific projector with the keypad, press P
the projector you want to use. If you switch to a projector other than the one you are currently using, the check
mark will disappear.
To broadcast to multiple projectors, press P
Keypad commands will then effect all projectors present.
NOTES: 1) There is no method of controlling a group of projectors within the same wired configuration using
the wired keypad exclusively, since there is only one wired protocol available. 2) The projector's address can
be set in the Configuration Menu > Communications Submenu.
Enter
Press E to select a highlighted item, to toggle a check box, or to accept a parameter adjustment and return
NTER
to the previous menu or image.
Exit
Press E to return to the previous level, such as the previous menu.
XIT
does not save changes within text editing boxes (including number editing of a slide bar value) or
NOTE: E
XIT
within pull-down lists. In these cases, E
Arrow Keys
Use the L
/R
EFT IGHT
list without having to first scroll through options or navigate within a menu, pull-down list or text box.
Lens H and Lens V
When adjusting the image for focus, zoom or horizontal and vertical positioning, use the specific arrow keys
(L
/R A
EFT IGHT RROW
indicate the type of adjustment taking place. For example,
3-8
followed by two numeric numbers to
UNC
to disable Keystone, Edge Blending and
ELP
ROJ
acts as a "cancel".
XIT
to change a slide bar value or to select a different option within a pull-down
A K
RROW EY
or U
K /D A
EY P OWN RROW
will display green data.
and then enter the three-digit number assigned to
ROJ
and then P again without entering a projector number.
ROJ
) related to each function. A small window will appear to
K
EY
M Series Setup Guide
020-100011-05 Rev. 1 (07-2012)