Navigating The Menus - Christie M Series Setup Manual

• Use the F
OCUS
• Use the Z
OOM
• Use the L
ENS
• Use the L
ENS
Press E to return to a presentation level.
XIT
NOTE: Use the L
if using the arrow keys related to "Lens V" or "Lens H" on the Remote Keypad. All 4 lens settings can be
adjusted by using the soft keys.
Laser
Press L to activate the laser pointer on the remote. Point the remote
ASER
at the screen to highlight an area of your presentation.
NOTE: Leave batteries in the wired remote keypad for the L
work.
3.2

Navigating the Menus

Main Menu
Most of the projector controls are accessed from
within the projector's menu system. There are several
groups of related functions, with each group selectable
from the Main menu as shown at right. Press M
any time to display this Main menu.
On the remote keypad, enter the number correspond-
ing to the function menu you wish to access, such as 2
for the Image Settings menu. Or use the U
A K
on any keypad to highlight the desired
RROW EY
option, then press E
menu or pull-down list of further options will appear.
With a function menu displayed, enter a menu option number for any numbered option, or use the U
A K to highlight the desired option and then press E
RROW EY
use the arrow keys to access the remainder of the menu. Locked items or items that do not pertain to the current
action or condition appear dimmed and cannot be selected.
When finished with a Function menu:
• Press E
to return to the previous screen.
XIT
-OR-
• Press M to leave the menu system and return to the presentation.
ENU
If there is no signal present, all source-dependent adjustments are disabled.
NOTES: 1)
of inactivity, the projector leaves the menu system and returns to the presentation.
read-only.
M Series Setup Guide
020-100011-05 Rev. 1 (07-2012)
and the L
A
EFT RROW
and the L or R
A
EFT RROW
H and the L
A
EFT RROW
V and the U or D
A
P RROW
key (built-in keypad) with the general U
ENS
. The corresponding function
NTER
or R to improve image clarity as desired.
A K
IGHT RROW EY
to achieve a desired image size.
A K
IGHT RROW EY
or R
A K
IGHT RROW EY
to position the image vertically.
A K
OWN RROW EY
/D
P
ASER
at
ENU
/D
P OWN
NTER
to position the image horizontally.
to get the same effect as
A K
OWN RROW EY
key to
F 3-3 M
IGURE AIN
. Long menus have a scroll bar on the right—
3)
Section 3: Operation
M
ENU
/D
P OWN
After 15 minutes
2)
The Status menu is
3-9