Base With Supports (Art. No.: 062489); Fixed Water Supply; Appendix; Declaration Of Conformity - Schaerer Siena 1/2 User Manual

www.schaerer.com
64

Base with supports (Art. No.: 062489)

A base is required for machines with a wastewater connection (supply and drainage pipes).
This is only required if no holes are to be drilled into the counter!

Fixed water supply

FA fixed water supply is strongly recommended for coffee machines dispensing a large quan-
tity of beverages.A fixed water supply is generally possible wherever supply pipes and drainage
pipes are present. The ideal water hardness for a fixed water supply is between:
5 – 7 °dH / 8 – 12 °fH
Fixed water supply - structural requirements
FMinimal, basic structural conditions are required for the fixed water supply. (Refer to the installa-
tion plan, page 45).
The fixed water supply option may only be installed by a qualified service technician!

Appendix

Declaration of conformity

These products correspond to the requirements of the EU directives.
2006/95/EC
EC low-voltage directive
2004/108/EC EC Directive, Electromagnetic Compatibility
Information about the declaration of conformity can be obtained from the manufacturer upon
request:
Manufacturer:
M. Schaerer AG
Gewerbestrasse 15
3302 Moosseedorf
Switzerland
info@schaerer.com www.schaerer.com
For more information please contact your local dealer!
(= carbonate hardnes)
Appendix
BASI 2 - EN
Version 04
08.2007