Preparing Hot Water (Siena 2); Preparing Steam (Siena 1); Preparing Cappuccino (Siena 2); Preparing Milk Foam (Siena 1) - Schaerer Siena 1/2 User Manual

Operation
BASI 2 - EN
Version 04
08.2007

Preparing hot water (Siena 2)

The temperature indicator
► Place a cup under the hot water outlet.
► Press the button. The dispensing procedure is stopped by pressing the
again.
► Remove the cup from under the outlet.

Preparing steam (Siena 1)

Not possible with the Siena 2!
► Place a cup under the hot water outlet.
► Turn the rotary dial (on the right-hand side) to the [ Steam ] position.
► To cancel the dispensing procedure, turn the rotary dial back to its starting position (centre).
► Remove the cup from under the steam outlet.
► Clean the steam wand with a paper towel.
If products have been heated or frothed, dispense steam for a brief period in order to clean the
steam outlet of residue.

Preparing cappuccino (Siena 2)

Die Cappuccino Ausgabe kann nicht unterbrochen werden!
► Move the milk tube with the milk nozzle downwards into the milk container (refer to the pic-
ture).
► Place a cup under the outlet.
► Touch the cappuccino button. The product is dispensed.
► Remove the cup from under the outlet.
To prepare macchiato, follow the same instructions as for preparing cappuccino. The only
difference is that milk is poured into the cup before the dispensing procedure and the time-out
between the dispensing of milk and coffee is longer.

Preparing milk foam (Siena 1)

Milchschaum kann jederzeit bezogen und/oder nachdosiert werden.
► Unscrew the screw.
► Fit the foam nozzle to the steam outlet. Retighten the screw.
► Place a cup under the steam outlet.
► Place a cup under the steam outlet. Turn the rotary dial (on the right-hand side) to the [ Steam ]
position.
► To cancel the dispensing procedure, turn the rotary dial back to its starting position (centre).
► Remove the cup from under the outlet.
After dispensing milk foam, dispense some steam for a short period in order to clean the foam
nozzle and the outlet of milk remains.
► After dispensing foam, clean the foam nozzle under warm, running water.
lights up in green.
www.schaerer.com
button
49