Commissioning; Before Using For The First Time - Schaerer Siena 1/2 User Manual

www.schaerer.com
46

Commissioning

Before using for the first time:

Never operate the device without water. After longer periods of non-use (e.g. due to holiday), it is
recommended for hygienic reasons that the device be rinsed by means of the hot water/steam
injector and the cleaning program started before the device is used again.
► Place the package on the ground with the number facing up; carefully cut the adhesive tape
open.
► Place the device on a stable, horizontal surface. Do not set it down on hot or warm surfaces.
Choose a location that is not easily accessible to children or pets.
► Insert the drip tray as far as it will go.
► Fill the water tank with (cold) water (max. 2.4 litres), insert it at the front of the device and press it
on firmly.
On devices with the fixed water supply option, the tank cannot be removed.
For machines with fixed water supply:
Always use the new hose set (fresh water hose) provided with the machine!
► Pull the connector cable on the rear of the device out to the required length, and connect the
device to a grounded socket.
Never insert the power plug into the socket if it is wet, and never touch the plug with wet hands.
► Reclose the cord compartment.
► Switch on the power switch. The device is now in Stand-by mode.
This does not apply to coffee machines with the coin tester option.
► Press the
button to switch on the device (LED in the button lights up).
► Fill the bean container (Siena 1: 300 g Siena 2: 600 g). Close the bean container with the lid to
form a tight seal.
Only pure whole coffee beans may be used – no coffee with caramelised or aromatised beans.
► When the temperature indicator
the display, the machine is ready to operate.
Each time the device is commissioned, the device automatically rinses the brew unit. During this
rinse procedure, no products can be dispensed.
► Touch the product button. The first beverage is dispensed.
This beverage is not edible, since the grinder's coffee duct must first be filled/rinsed. Please wait to
drink the following beverage.
lights up (in green) and the message „Ready" appears on
Operation
BASI 2 - EN
Version 04
08.2007