Operating Modes; Preparing Products; Preparing Coffee / Espresso (Whole-Bean Coffee); Preparing Decaf Coffee (Coffee Powder) - Schaerer Siena 1/2 User Manual

Table of Contents

Advertisement

www.schaerer.com
<< Stand by >>
<< Stand by >>
Ready
Ready
48

Operating modes

The Siena 1 / 2 has two (2) operating modes:
The machine is switched off but still connected to the power supply.
The following message appears on the display (shown left).
The machine is ready to operate.
The following message appears on the display (shown left).

Preparing products

If the „water low" function indicator
re-insert the tank.

Preparing coffee / espresso (whole-bean coffee)

The following instructions assume that the machine is ready to operate.
► Place a cup under the outlet (adapt the size to the product).
► Touch the desired product button. The product is dispensed.
► Wait until „Ready" appears on the display. Remove the cup from under the outlet.
For a double product (2 cups), press the

Preparing DECAF coffee (coffee powder)

Do not use any water-soluble, freeze-dried or similar products. Use only pure, ground coffee. Fill
no more than 1-2 (level) measuring spoons into the coffee hopper.
► Press the
button. The indicator lights up.
► Place a cup under the outlet. The indicator flashes.
► Touch the desired product button. „Coffee powder" appears on the display.
► Remove the lid from the hopper and add coffee powder. Press the
dispensed.
► Remove the cup from under the outlet.
If no additional product button is pressed within ± 2 minutes after the
red indicator for coffee powder goes out.
For a double product (2 cups), press the

Preparing hot water (Siena 1)

The temperature indicator
► Place a cup under the hot water outlet.
► Turn the rotary dial (on the right-hand side) to the [ Hot water ] position.
► To cancel the dispensing procedure, turn the rotary dial back to its starting position (centre).
► Remove the cup from under the outlet.
blinks during product dispensing, top up with water and
button before pressing the product button.
button before pressing the
lights up in green.
Operation
button. The product is
button is pressed, the
button.
BASI 2 - EN
Version 04
08.2007

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents