To Setup Alarm Recording Setting; To Setup Sms/Mms Setting - Avermedia NV 3000 User Manual

NV3000/5000/6000/7000/7000H User Manual
5. Click OK to exit and save the setting and Cancel to exit without saving the
setting.

5.9.6 To Setup Alarm Recording Setting:

1. Beside the Start Recording check box,
click Detail .
2. In the Alarm Recording Setting dialog box,
select the camera to enable/disable video
recording. Enable All to select all
cameras.
3. In the Frame Rate selection, select As
Setting to record the number of frames based on the Recording Setting or
Max to record the maximum of frames based on the available speed.
4. In the Stop Recording after text box, set the number in second for the
program to continue recording after the alarm has ended.
5. Click OK to accept the new settings and Cancel to exit without saving.

5.9.7 To Setup SMS/MMS Setting:

To use this feature, GSM/GPRS modem is
required. Connect the GSM/GPRS modem to
the serial COMM port of PC. Beside the
SMS/MMS check box, click Detail .
Select the port number in ComPort drop
down list from where the GSM/GPRS modem
is connected.
1. Click Modem Setup button to
automatically detect the Modem Baud
Rate.
2. In Local Phone Number text box, enter
the GSM SIM card phone number.
3. In Phone Num text box, enter the contact
number.
4. You may now set to send thru SMS &/or
MMS. If you enable SMS setting, just
enter the message in the text box. If you
enable MMS, enter the APN name, WAP
IP, MMS address and the message. If
you are not sure, please contact your mobile service provider.
5. Attach image when sensor is triggered select the camera that the images will
be capture and send when the sensor is triggered.
6. Click OK to accept the new settings and Cancel to exit without saving.
i
Make sure your ISP provider and cell phone provider both support JPG file
format transmitting.
58