To Setup Alarm Relay; To Setup The Alarm Sound Setting - Avermedia NV 3000 User Manual

Chapter 5.9.7).
- PTZ preset point
Position the PTZ camera based on the preset point setting. To setup click
Detail (see also
- Alarm SOP (Standard Operation Procedure)
List the instructions to inform the person of what to do when the alarm is
activated. To setup click Detail (see also
- Send to CMS (Central Management System)
Enable/disable the selected camera to send video to CMS when the alarm is
activated (see also Chapter 5.9.10)
Launch Program
-
To call up the external program that is provided by 3
click to locate the program path. Enable Multiple instance check box to
allow the program can be executed many times at the same time.

5.9.1 To Setup Alarm Relay:

1. Beside the Relay Output check box, click
Detail .
2. In the Alarm Relay dialog box, select from the
available relay list and in the ON column, set
to enable/disable the relay operation when the
alarm is activated.
In the Retrieve time check box, you may
enable/disable to extend the relay operation
time and set the duration in second.
3. Click OK to exit and accept the setting and
Cancel to exit without saving the setting.

5.9.2 To Setup the Alarm Sound Setting:

1. Beside the Play Warning Sound check
box, click Detail .
2. In the Alarm Sound Setting dialog box,
click
other source or folder, Play to listen,
Record to make a new copy of a
sound.
3. If you click Record , you will be
prompted if you want to replace the
file.
Cancel to discontinue.
Chapter 5 Customizing NV DVR System
Chapter 5.9.8).
to select other wav file from
Click OK to continue and
Chapter 5.9.9).
rd
55
party. Click Detail and