To Setup Remote Console Setting - Avermedia NV 3000 User Manual

Name Function
(12) Event Show the record of activities that take place in the system. To filter
log the records, select and click the option button to only display
Event, System, Operation, Network or POS.
(13)
Capture and save the screen shot either in *.jpg or *.bmp format.
Snapshot
(14) Full
Use the entire area of the screen to only display the video.
screen
To return, Right click the mouse or press ESC on the keyboard.
Alert and display warning info. Only Administrator-level can reset
(15) Alarm
and turn on, off and trigger the Sensor and Relay by right-clicking
the item in the Sensor and Relay list.

8.3.1 To Setup Remote Console Setting

Click OK to exit and save the setting and Cancel to exit without saving the setting.
(1) Storage Path
Set the directory on where to save the data. When there is not enough free space to
record one hour data, the system automatically replaces the oldest data. In case you
have more than one storage path, the system automatically saves the data to the next
storage path.
By default the data is stored in C:\RemoteData, to insert another storage path, click
Add . To remove the selected path, click Delete .
If you want the system to automatically erase the data after a certain days, enable the
Delete recorded data after check box and enter the numbers of days in Days text
box.
(2) Language
Customize the system to display the tool tips and dialogs based on the selected
language. By default the language is in English.
(3) Remote Server
Enter the NV DVR Server IP and Port number.
(4) Channel Settings
The numbers from 01 to 16 represent the camera ID. In Transmitting Channels section,
enable the camera number to receive the camera signal from the server. In Visible
Channels section, enable the camera number to view the camera signal on Remote
Console screen. To select all the cameras, enable the ALL check box.
Chapter 8 Using the Remote Programs
(1)
(2)
(3)
(4)
75