Press A under ↵ icon to continue. You see a message that the
5.
printer is calibrating the supply.
SUCCESSFUL
↵
The printer does not feed supplies while calibrating. The printer
records the sensor value read from the label on the liner.
Press A under ↵ or press A under X to return to the Stock Sensor
6.
menu.
Press F to return to the Printer menu.
7.
Selecting the Aperture Sensor
1.
From the Printer menu, select Stock Sensor, Aperture.
Aperture Sensor
Selected
↵
Press A under ↵.
2.
Insert label...
Then hit Enter
↵
3.
Load the supply by placing the supply across the exit chute.
X
±
Exit chute
Setting Up the Printer 3-19