Table of Contents
Advertisement
Adjusting the Print Contrast
Contrast controls the darkness of the printing on your supply. The range
is between -28 to 40. The default is 0.
You may need to adjust your contrast based on which supply you are
using. Linerless supplies may need a higher or lower contrast setting.
Receipt paper requires a lower contrast setting.
For linerless or synthetic supplies, you must select High Energy from the
Stock Energy menu.
From the Setup menu, select Printer, Contrast.
1.
Print Contrast
+00
↵
Use A as shown in the following table:
↵
Press A to
Enter
Save the setting
When the setting you want is displayed, press A under ↵ to save the
2.
setting.
You return to the Printer menu.
+
Press A to
Set the position (+00)
1 st position
2 nd position
3 rd position
+
Press A to
Toggle between
positive and negative
Increase the setting
by 10
Increase the setting by 1
Setting Up the Printer 3-7
Advertisement
Table of Contents
