Camera Selection - Panasonic WJ-SX550C Operating Instructions Manual

Notes: The desired monitor selection may not be avail-
able due to one of the following reasons:
• The System Controller used for selecting a particu-
lar monitor is not allowed access to that monitor
because of controller partitioning.
See page 18 for more details.
• The desired monitor is currently selected by anoth-
er operator who has a higher operator priority, and
therefore, control over that monitor.
In this case, "Monitor Busy" or "NOT AVAILABLE"
will be displayed on the LCD Display of the System
Controller.
1

Camera Selection

The video signal from the desired camera can be supplied
to the selected monitor.
Press the Numeric keys (1 to 128), then press the CAM
(SET) key to select the desired camera.
For example: When selecting Camera Number 2:
Press 2, then press the CAM (SET) key.
Notes: The desired camera selection may not be avail-
able due to one of the following reasons:
• The operator is not allowed access to the desired
camera because the Operator Registration has lim-
ited the operator's access to certain cameras.
See page 16 for more details.
• The desired camera is currently selected by anoth-
er operator who has a higher operator priority, and
therefore, control over that camera.
In this case, "Camera Busy" will be displayed on
the LCD Display of the System Controller.
Camera Site Control
The selected camera (if applicable) can be controlled by
the System Controller.
Specified Panasonic combination cameras can have vari-
ous functions controlled remotely without the need for a
receiver.
Note: Because future camera models may have additional
features and functions, please refer to the Operating
Instructions provided with the camera for more details.
12
1 2 3
4 5 6
7 8 9
0
MON CAM
ESC SET
Lens Focus Control
This control is used to adjust the lens focus to obtain a
sharply focused picture while observing the monitor screen.
Lens Zoom Control
This control is used to adjust the lens zoom to obtain the
desired picture while observing the monitor screen.
Lens Iris Control
This control is used to close or open the lens iris to obtain
the proper picture exposure while observing the monitor
screen.
Pan/Tilt Control
This control is used to pan or tilt the pan/tilt head.
The following operations are available.
• Manual Operation
Using the Joystick Controller to move the Pan/Tilt head
towards the desired direction.
Eight directions are available: UP/DOWN/RIGHT/ LEFT/
UP-RIGHT/UP-LEFT/DOWN-RIGHT/DOWN-LEFT.
• Auto Panning Operation
It is necessary to use a Pan/Tilt head such as the WV-
7225 or specified Panasonic combination camera
equipped with the auto pan feature in a system.
• Random Panning Operation
It is also necessary to use a Pan/Tilt head equipped
with the random panning feature, such as the WV-7225,
in a system.
Preset Control
The preset function is used to memorize the focus, zoom,
pan and tilt setting values of any scene to have them avail-
able for easy recall at any time.
In addition, if the Camera Position Number is saved with its
associated camera number and preset position, the cam-
era position can be recalled quickly by activating the cam-
era selection and preset function at the same time.
This control is available when the specified camera
equipped with the preset feature is used in a system.
Auxiliary (AUX) Control
This control is used to turn on or off the user's auxiliary
switches located in the Receiver, such as the WV-RC100 or
WV-RC150 Receivers.