Auto input switching
(Power on link)
When the following operations are performed, the TV will automatically
switch the input channel and display the corresponding action.
Additionally when the TV is off, the TV will automatically turn on:
– When play starts on the unit
– When an action that uses the display screen is performed (e.g., START
menu)
≥ When you switch the TV input to TV tuner mode or the STB input
channel, this unit will automatically switch to “AUX”
, “ARC”
or
§2
§1, 2
“D-IN”
.
§2, 3
≥ When you start disc play, the TV will automatically switch its input mode
for this unit.
Power off link
All connected equipment compatible with “HDAVI Control”, including this
unit, automatically turn off when you switch the TV off.
To continue audio playback even when the TV is turned off, select “Video”
(
18, “Power Off Link” in HDMI menu).
When you press [Í]1, only this unit turns off. Other connected equipment
compatible with VIERA Link “HDAVI Control” stays on.
For details, refer also to the operating instructions for your TV.
Speaker selection
You can select whether audio will output from this unit’s speakers or the
TV speakers by using the TV menu settings. For details, refer to the
operating instructions for your TV.
Home Cinema
This unit’s speakers are active.
≥ When you turn on this unit, this unit’s speakers will be automatically
activated.
≥ When this unit is in standby mode, changing the TV speakers to this
unit’s speakers in the TV menu will automatically turn this unit on and
select “AUX”
, “ARC”
or “D-IN”
as the source.
§2
§1, 2
§2, 3
≥ The TV speakers are automatically muted.
≥ You can control the volume setting using the volume or mute button on
the TV’s remote control. (The volume level is displayed on the main
unit’s display.)
≥ To cancel muting, you can also use this unit’s remote control (
4).
≥ If you turn off this unit, TV speakers will be automatically activated.
TV
TV speakers are active.
≥ The volume of this unit is set to “0”.
– This function works only when “DVD/CD”, “USB”, “AUX”
, “ARC”
§1, 2
§2
or “D-IN”
is selected as the source on this unit.
§2, 3
≥ Audio output is 2-channel audio.
When switching between this unit speakers and TV speakers, the TV screen
may go blank for several seconds.
§1 The selection works only when using an ARC compatible TV.
§2 “AUX”, “ARC” or “D-IN” (DIGITAL IN) works depending on the TV
audio setting (
left, Setting the audio link with the TV).
§3 “D-IN” (DIGITAL IN) works depending on the STB audio setting
(
left, Setting the audio link with the STB).
15