Input/Output; Default Settings; Connectors - Dalsa 1M75-SA User Manual

20

2.3 Input/Output

!
WARNING: It is extremely important that you apply the appropriate voltages to your
camera. Incorrect voltages will damage the camera.

2.4 Default Settings

The camera power-ups for the first time with the following default settings.
Table 5: Default Settings
Specifications
EXSYNC
Data output
Output response
Gain
Resolution
Exposure time
Frame rate
Data rate

2.5 Connectors

Please refer to the Camera Link standard for detailed information on signal levels and
timings.
Table 6: Pinout of the MDR26 camera connector for the Camera Link interface
Camera Link Cable
Base Configuration
One Channel Link Chip + Camera Control + Serial Communication
Camera Connector
1
14
2
03-32-00525-03
PRELIMINARY
+5V and Ground
Diagnostic LED
Camera Link™
1M28
Internal, free-running
8-bits
Linear
1x
Full-resolution, 1024 x 1024
10 ms
20 fps
28MHz
Right Angle Framegrabber Channel Link Signal
1
14
25
1M28 and 1M75 User's Manual
1M75
Internal, free-running
8-bits
Linear
1x
Full-resolution, 1024 x 1024
12 ms
25 fps
2x40MHz
inner shield
inner shield
X0-
DALSA