Table of Contents
Advertisement
SECTION 2: INSTALLATION
4.
Follow the manufacturer's instructions to attach the camera mounting bracket to the mounting surface.
5.
Attach the camera to camera mounting bracket.
6.
Attach the RS-485, alarm output device, and D&N switch to the terminal block on the back of the camera, as needed. See
"1.1.1 Camera back panel" on page 2 for more information. Wire these devices to the camera in compliance with local codes.
7.
Connect the HD-SDI connector on the back of the camera to a DVR or monitor with HD capabilities using suitable coax cable.
8.
Connect the VIDEO OUT connector to a local setup monitor (optional). (Use a setup monitor while making installation setup
adjustments to the camera.)
6
Advertisement
Table of Contents
