Table of Contents
Advertisement
SECTION 3: CONFIGURATION SETUP
ACE: Select Digital WDR (Wide Dynamic Range): OFF / ON. NOTE: When ACE is On, WDR/BLC and DEFOG function can not turn
•
on.
DNR: Select Digital Noise Reduction: AUTO / OFF / LOW / MIDDLE / HIGH
•
D.COMPRESS: Use this function only with IP camera. Set to OFF.
•
GAMMA: Set gamma level for best display
•
3.6 INTELLIGENT
PRIVACY: Hide an area you want to hide on the screen: OFF / ON
•
MASK#: Select mask area number (0 ~ 31)
—
MODE: Set-up masking areas. (OFF / ON)
—
X-POS: Adjust the mask X-Axis position
—
Y-POS: Adjust the mask Y-Axis position
—
X-SIZ: Adjust the mask X-Axis size
—
Y-SIZ: Adjust the mask Y-Axis size
—
COLOR: Cyan, Green, Magenta, Red, Blue, Black, White, Yellow
—
TRANS: Select mask transparency level (0 ~ 4)
—
12
WDR Off
WDR ON
Advertisement
Table of Contents
