SECTION 3: CONFIGURATION SETUP
SECTION 3
Configuration Setup
Use the on-screen display (OSD) menus to configure your camera for the environment where it is installed and recording
requirements you prefer.
3.1 Menu operation
Navigation through the menu system is performed menu navigation buttons located under the camera side panel.
Up button p: Moves the cursor upwards in the menu. Use this button to select an item or adjust the parameters.
•
Down button q: Moves the cursor downwards in the menu. Use this button to select an item or adjust the parameters.
•
Right button u: Moves the cursor to the right in the menu. Use this button to select or adjust the parameters of the
•
selected item. The parameter changes each time this button is pressed.
Left button t: Moves the cursor to the left in the menu. Use this button to select or adjust the parameters of the selected
•
item. The parameter changes each time this button is pressed.
Set button
: Opens the OSD menu system and executes selections and displays a submenu for an item with the mark.
•
Press the Set button to open the OSD main MENU consists of a
list of sub-menus or displays the option selected for a camera
function. When sub-menus are available, the
shown.
8
symbol is