Table of Contents
Advertisement
SECTION 1: INTRODUCTION
NOTES:
Lens: The camera accommodates a standard C or CS mount lens.
•
Menu operation buttons: Slide the side panel back to access these buttons. See "3.1 Menu operation" on page 8 for more
•
information.
Mounting bracket: The mounting bracket can be attached to the top-side or under-side of the camera.
•
Flange back (back focus) set screw: Used to lock the flange back. The adjustment is required only when a lens without
•
focus-adjusting mechanism is mounted, or when a lens with adjusting mechanism is mounted and more accurate focus that
is needed.
Lens iris output connector: 4-pin connector used to send the Iris control signal and power supply to an auto-iris type lens
•
1.1.1 Camera back panel
External device
connections
Power input
terminals
2
2
4
BLK-HDC10 back connectors
1
Pin
1
2
3
4
3
Power indicator
DC -type lenses
Damping -
Damping +
Drive +
Drive -
HD-SDI connector
Video out connector
Advertisement
Table of Contents
