Hammond XK-3 Owner's Manual page 61

17. FOOT-SWITCH - 1 TIP (G)
This is for setting the function for the Foot Switch 1 terminal.
If you are using the Foot Switch with the stereo plug, this sets the function on the tip side.
OFF:
Does not work.
LESLIE S/F ALT:
LESLIE S/F MOM:
These are for switching SLOW/FAST of the Leslie Effect.
At ALT, it switches at each step/press and, at MOM, the Leslie effect gets Fast, as
long as you keep pressing the foot switch, and it gets Slow if you release it.
DAMPER UPPER:
DAMPER LOWER:
DAMPER PEDAL:
They hold the Notes of the UPPER, LOWER and PEDAL Parts, respectively, as
long as you keep depressing the footswitch.
PRESET FWD:
PRESET REV:
They are for switching one Combination Preset to the right (FWD) or the left
(REV).
SPRING:
This is for producing a springing sound of the Spring Reverb.
DELAY TIME:
It sets the delay time of the reverb effect (P . 73) along the kicked intervals.
18. FOOT-SWITCH - 1 RING (G)
This is for setting the function on the RING side, if you use the FOOT SWITCH equipped
with the Stereo plug.
19. FOOT-SWITCH - 2 MODE (G)
This is for setting the function of the FOOT SWITCH attached to the Expression Pedal
EXP-100F (= optional).
20. DEMO (G)
This is for setting the function of the [DEMO] BUTTON.
DEMO PLAY: Plays the demonstration performance.
PEDAL SUS: Switches On/Off Sustain of the PEDAL Part.
EX. ZONE: Switches On/Off the External Zone transmission.
LOWER OCT: Switches 0/+1 of the LOWER Octave.
LES. BRAKE: Means the [LESLIE BRAKE] Button.
LES. ON: Means the [LESLIE ON] Button.
LES. FAST: Means the [LESLIE FAST] Button.
VIB. ON: Means the [VIBRATO/CHORUS] Button.
21. DISPLAY - SHORT CUT (G)
It sets the time limit to the short cut function.
The range is 0s to 2s and NO short cut. The short cut function does not work when the
value is in "NO".
22. DISPLAY - TIME OUT (G)
It sets the time limit to return to the previous screen from the one displayed by using the
short cut operation.
The range is 4s to 16s and NO time out. The time out function does not work when the
value is in "NO".
NOTE: The parameters by the names with (P) on the tail are Preset Parameters, and are
recorded to each Combination Preset. (G) is for "Global". These parameters will be
recorded when set, and are common in each Combination Preset.
DAMPER
The word "Damper" comes from the damper
pedal of the piano.
The piano stops sounding when you release your
finger from the key. This is because of the
damper system. While you hold the damper
pedal, the system does not work and so it keeps
sounding even after you release the key.
SPRING REVERB
The Spring Reverb is a reverb effect to obtain the
reverberation using the spring resilience. It was
easily affected by a shock and it used to give a
big "clang".
However, this drawback has come to be used as
an effect in the genre of progressive rock. This
keyboard gives the simulated sound.
TIP AND RING
When you look at the plug of the stereo
headphones, there are 3 metal parts. The head
portion is called "Tip" and the middle portion is
the "Ring". And the part on the cord side is
called "Sleeve".
The ordinary foot-switch has only the Tip and
the Sleeve, but the footswitch with two switches
in one plug or two footswitches using the L/R
converting cable can be connected.
Setting the Parameters
61