Leslie - Hammond XK-3 Owner's Manual

68
In this mode, you can do the setting for the built-in Leslie
Effect and the External Leslie Speaker.
There are many parameters for the built-in Leslie Effect,
and so you can do various settings, but not per each
Combination Preset independently.
The parameters are treated by the group called "CABI-
NET". You can select the CABINET NUMBER in the
18
16 17
10 11
3 4
2
1
CABINET NUMBERS
1. LESLIE CABINETS
Here you select the CABINET NUMBER to use in the Combination Presets.
The setting range is 1 - 8. The "*" will displayed when the Leslie Parameters are
changed from this Cabinet Number.
LESLIE PARAMETERS
2. CABINET NAME
This is for putting the Cabinet Names.
Move the cursor by the [PARAM] button and select letters by the [VALUE].
In this mode, only the present value "Temporary" changes and there is no determining
operation. You must record the name by doing "Recording the Cabinet" as explained
in the next paragraph. Otherwise the data will be lost.
3. SLOW SPEED - HORN
10. SLOW SPEED - BASS
Here the Speed of the Rotor is set for Slow Speed.
The setting range is 0, 24 - 48 rpm. It does not rotate at 0.
4. FAST SPEED - HORN
11. FAST SPEED - BASS
Here the Speed of the Rotor is set for Fast State.
The setting range is 0, 375 - 435 rpm. It does not rotate at 0.

LESLIE

12 13
5 6
Owner's Manual
Combination Presets.
To come to this mode:
1. Touch the [MENU/EXIT] button to display the MENU.
Then select PAGE C by the [PAGE] button and touch [3]
LESLIE.
2. Or, hold down either [LESLIE BREAK], [LESLIE ON] or
[LESLIE FAST].
14 15
7 8
CONCEPT OF THE CABINET NUMBERS
Each Cabinet represents one imaginary Leslie
Speaker prepared by the Leslie Parameter.
This parameter is the only Preset Parameter in this
mode.
9